CB-SPA312I-02 ConnectBlue, CB-SPA312I-02 Datasheet - Page 27

• Manufacturer Part Number: CB-SPA312I-02
• Description: SERIAL PORT ADAPTER 312I BTOOTH
• Manufacturer: ConnectBlue
• Series: CB-SPAr

Specifications of CB-SPA312I-02

• Function: Transceiver, Bluetooth
• Modulation Or Protocol: Bluetooth v2.0, Class 1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RS-232
• Data Rate - Maximum: 54Mbps
• Features: Wireless Multidrop™
• Voltage - Supply: 4 V ~ 6 V
• Package / Case: Packaged Unit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Sensitivity: -
• Other names: 809-1026

2.
3.
4.
5.3 Technical Specifications
5.3.1 Environmental
Storage temperature: -30 - +85 °C
Maximum operating temperature: -30 - +85 °C
disconnects.
There is no color on the LED indicator.
When I search for other devices using the configuration wizard I cannot find the device
I’m searching for.
The Bluetooth link between my Serial Port Adapter and my selected remote peer
•
•
•
•
•
•
•
•
•
•
•
You have configured your Serial Port Adapter to act as a client but you have
not selected a server device to connect to. Select a server device using the
configuration wizard.
Your Serial Port Adapter is too far away from the selected server device. Move
the Serial Port Adapter closer to the server device.
You are not using the correct Bluetooth profile. Your Serial Port Adapter must
be configured to use the same profile as the device you want to communicate
with.
The remote device is not in connectable mode. If the server device is another
Serial Port Adapter use the configuration wizard to set the device in
connectable mode. If the device is another Bluetooth device, consult the
manual for that device to set it in connectable mode.
Make sure that the Serial Port Adapter is in transparent data mode (green
light). Make sure that the Serial Port Adapter is not in configuration mode
(orange light). After configuring your Serial Port Adapter, remember to exit
the configuration wizard before disconnecting it from the PC.
If high security mode has been selected on one of the devices wanting to
communicate, the two devices have to be paired with each other. Either
disable security or perform pairing. Also, note that pairing is automatic during
a connection setup if it is needed.
Your Serial Port Adapter is configured to disconnect if no data is received or
sent during a longer period of time. Use the configuration wizard to disable
the automatic disconnect or change the value of the timer.
Your Serial Port Adapter is too far away from the device it is communicating
with. Move the two devices closer to each other.
Make sure that power is connected to the Serial Port Adapter.
The remote device is too far away. Move it closer to your Serial Port Adapter.
The remote device is not in discoverable mode. If the remote device is a Serial
Port Adapter use the configuration wizard to set it in discoverable mode. If
the remote device is another device, consult the manual of that device to set it
in discoverable mode.
27