X4-Z11-A01-A Digi International, X4-Z11-A01-A Datasheet - Page 69

• Manufacturer Part Number: X4-Z11-A01-A
• Description: CONNECTPORT X4 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-Z11-A01-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ45, DB-9, USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 6 V to 30 V
• Output Power: 1.5 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1172





Data Encryption: Multiple encryption methods can be selected.
–
–
WEP Keys
–
–
WPA PSK (Pre-Shared Key) Passphrase/Confirm:
network uses with WPA pre-shared keys. The pre-shared key is calculated
using the passphrase and the SSID. Therefore, a valid network name must
have been previously specified. In the Confirm field, reenter the passphrase.
Username/Password/Confirm: The username and password combination used to
authenticate on the network when using these authentication methods:
802.1x authentication, WPA with 802.1x authentication, or LEAP. In the
Confirm field, reenter the password.
encryption is valid only with Open System and Shared Key authentication.
WEP encryption can be used with any of the above authentication methods.
wireless link. TKIP encryption can be used with WPA-PSK and WPA with 802.1x
authentication.
WPA-PSK and WPA with 802.1x authentication.
encryption. These keys allow the wireless network to traverse different wireless
networks without having to change the wireless key. Instead, only the transmit key
setting has to be changed to specify which wireless key to send.
characters. The encryption key should only contain the characters A-F, a-f, or 0-9.
Optionally, separator characters, such as '-', '_', or '.' may be used to separate the set
of characters.
Use any available encryption method:
method used will be determined by the capabilities of the wireless network.
Use the following selected method(s): Selects one or more encryption
methods.
Open System: No encryption is used over the wireless link. Open System
WEP: Wired Equivalent Privacy (WEP) encryption is used over the wireless link.
TKIP: Temporal Key Integrity Protocol (TKIP) encryption is used over the
CCMP: CCMP (AES) encryption is used over the wireless link. CCMP can be used
Transmit Key: Specify the corresponding key of the encryption key that should be used
when communicating with wireless networks using WEP security.
This device allows up to four wireless keys to be set of either 64-bit or 128-bit
Encryption Keys: Specify 1 to 4 encryption keys to be used when communicating with
wireless networks using WEP security.
The encryption keys should be a set of 10 (64-bit) or 26 (128-bit) hexadecimal
enables all of the methods. The actual
The passphrase that the Wi-Fi
C o n f i g u r e D i g i d e v i c e s
WEP with
6 9