ATA5811-PLHC Atmel, ATA5811-PLHC Datasheet - Page 21

• Manufacturer Part Number: ATA5811-PLHC
• Description: IC TXRX UHF ASK/FSK 1CH 48-QFN
• Manufacturer: Atmel

Specifications of ATA5811-PLHC

• Frequency: 433MHz, 868MHz
• Data Rate - Maximum: 20kbps
• Modulation Or Protocol: ASK, FSK
• Applications: Access Control, AMR, RKE
• Power - Output: 5dBm
• Sensitivity: -116dBm
• Voltage - Supply: 2.4 V ~ 3.6 V or 4.4 V ~ 6 V
• Current - Receiving: 10.5mA
• Current - Transmitting: 16mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Memory Size: -
• Other names: ATA5811-PLHCTR; ATA5811-PLQ; ATA5811-PLQTR; ATA5811-PLQTR

5.14
4689F–RKE–08/06
RX/TX Switch
Table 5-9.
The RX/TX switch decouples the LNA from the PA in TX mode, and directs the received power
to the LNA in RX mode. To do this, it has a low impedance to GND in TX mode and a high
impedance to GND in RX mode. To design a proper RX/TX decoupling a linear simulation tool
for radio frequency design together with the measured device impedances of
10,
element values have to be found on board.
equivalent circuit of the switch. The principal switching operation is described here according to
the application of
Table 5-10.
Figure 5-11. Equivalent Circuit of the Switch
Table 5-7 on page
T
T
T
amb
amb
amb
433.92
Frequency
868.3
315
VS =
= +105°C
= –40°C
= +25°C
MHz
MHz
MHz
Measurements of Typical Output Power Relative to 3V/25°
Impedance of the RX/TX Switch RX_TX2 Shorted to GND
Figure 2-1 on page
20,
Table 5-10
–2.4 dB
–1.6 dB
–2.4 dB
Z(RX_TX1) TX Mode
2.4V
2.5 pF
6. The application of
(4.8 + j3.2)
(4.5 + j4.3)
and
11
(5 + j9)
Table 5-11 on page 22
RX_TX1
1.6 nH
Figure 5-11 on page 21
TX
5
–0.7 dB
–0.8 dB
3.0V
0 dB
Figure 3-1 on page 7
ATA5811/ATA5812
should be used, but the exact
Z(RX_TX1) RX Mode
shows an approximate
(11.3 – j214)
(10.3 – j153)
(8.9 – j73)
Table 5-1 on page
works similarly.
+0.9 dB
+0.1 dB
3.6V
0 dB
21