XBP24-ACI-001 Digi International/Maxstream, XBP24-ACI-001 Datasheet - Page 61

• Manufacturer Part Number: XBP24-ACI-001
• Description: MODULE 802.15.4 100MW CHIP ANT
• Manufacturer: Digi International/Maxstream
• Series: XBEE-PRO™r

Specifications of XBP24-ACI-001

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: Home/Building Automation, Industrial Control, ZigBee™
• Power - Output: 20dBm (100mW)
• Sensitivity: -100dBm
• Voltage - Supply: 2.8 V ~ 3.4 V
• Current - Receiving: 55mA
• Current - Transmitting: 215mA @ 3.3V
• Data Interface: PCB, Through Hole
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -

XBee®/XBee‐PRO® RF Modules ‐ 802.15.4 ‐ v1.xEx [2009.09.23]
Identifies the UART data frame for the host to
correlate with a subsequent ACK (acknowledgement).
Setting Frame ID to ‘0' will disable response frame.
Request the remote is responding to
Identifies the UART data frame being reported
Matches the Frame ID of the Remote Command
Frame ID ( Byte 5)
Frame ID (Byte 5)
Start Delimiter
0x7E
Start Delimiter
Remote Command Response
TX (Transmit) Request: 64-bit address
0x7E
MSB
API Identifier Value: 0x97
If a module receives a remote command response RF data frame in response to a Remote AT Com-
mand Request, the module will send a Remote AT Command Response message out the UART.
Some commands may send back multiple frames--for example, Node Discover (ND) command.
Figure 3‐12. Remote AT Command Response.
API Identifier Value: 0x00
A TX Request message will cause the module to send RF Data as an RF Packet.
Figure 3‐13. TX Packet (64‐bit address) Frames
.
© 2009 Digi Internatonal, Inc.
Length
LSB
API Identifier
.
0x97
MSB
API- specific Structure
Length
Address ( bytes 6-13)
64- bit Responder
Indicates the 64- bit address
AT Command request
Frame Data
responding to the Remote
of the remote module that is
LSB
Destination Address (Bytes 6-13)
Identifier - specific Data
API Identifier
MSB first, LSB last.
Broadcast =
0x000000000000FFFF
0x00
cmdData
API-specific Structure
Checksum
1 Byte
Frame Data
16-
Identifier-specific Data
bit Responder Network Address ( bytes
cmdData
Set to the 16- bit network
address of the remote .
14-15)
.
0x01 = Disable ACK
0x04 = Send packet with Broadcast Pan ID
All other bits must be set to 0.
Checksum
1 Byte
Options (Byte 14)
Name of the command . Two
identify the AT command
ASCII characters that
Command Name ( bytes
16-17)
0 = OK
1 = Error
2 = Invalid Command
3 = Invalid Parameter
4 = No Response
Status ( byte 18)
Command Data ( byte 19-n)
register .
The value of the requested
Up to 100 Bytes per packet
RF Data (Byte(s) 15-n)
61