X24-009NSC Digi International/Maxstream, X24-009NSC Datasheet - Page 48

• Manufacturer Part Number: X24-009NSC
• Description: MOD RF 2.4GHZ 9600BPS W/RPSMA
• Manufacturer: Digi International/Maxstream

Specifications of X24-009NSC

• Frequency: 2.4GHz
• Data Rate - Maximum: 19.2kbps
• Modulation Or Protocol: FSK
• Power - Output: 17dBm
• Sensitivity: -110dBm
• Voltage - Supply: 5V
• Current - Receiving: 80mA
• Current - Transmitting: 150mA
• Data Interface: PCB, Through Hole
• Antenna Connector: RP-SMA
• Operating Temperature: 0°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -

XStream™ OEM RF Module – Product Manual v5.x00 [2006.02.24]
OEM Labeling Requirements
Antenna Usage
Label Warning
Antenna Warning
RF Exposure
Figure A‐01. Required FCC Label for OEM products containing 9XStream (900 MHz) OEM RF Module
Contains FCC ID: OUR9XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Figure A‐02. Required FCC Label for OEM products containing 24XStream (2.4 GHz) OEM RF Module
Contains FCC ID: OUR-24XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
inter
The preceding statement must be included as a CAUTION statement in manuals for OEM products
to alert users on FCC RF Exposure compliance.
MaxStream Modules are pre-FCC approved for use in fixed base station and mobile applications.
As long as the antenna is mounted at least 20 cm (8 in) from nearby persons, the applicatio
considered a mobile application. If the antenna will be mounted closer than 20 cm to nearby
persons, then the application is considered “portable” and requires an additional test perfor
on the final product. T
th
Ov
MH
the l
ab
th
© 2006 MaxStream, Inc. Confidential and Proprietary
e emissions from the module and how they affec
e antenna is covered under the FCC certification.
out an antenna you would like to use with the module and MaxStream
er 100 additional antennas have been tested and are approved fo
z Modules (including “Mag Mount”, “Dome”, “Multi-path” and “Panel” antennas). Because of
ference received, including interference t
arge number
WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
WARNING: This device has been tested with Reverse Polarity SMA connectors with the antennas
WARNING: This equipment is approved only for mobile and base station transmitting devices,
requirements are met. This includes a clearly visible label on the outside of the final
product enclosure that displays the contents shown in the figure below.
listed in Tables A.1 & A.2 of Appendix A. When integrated in OEM products, fixed
antennas require installation preventing end-users from replacing them with non-
approved antennas. Antennas not listed in the tables must be tested to comply with
FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions).
separation distances of (i) 20 centimeters or more for antennas with gains < 6 dBi or
(ii) 2 meters or more for antennas with gains ≥ 6 dBi should be maintained between
the antenna of this device and nearby persons during operation. To ensure
compliance, operation at distances closer than this is not recommended.
of approved antennas, MaxStream requests that you send specific information
his test is called the Specific Absorption Rate (SAR) testing and measures
hat may cause undesired operation.
t the person.
r use with MaxStream 900
will evaluate whether
med
n is
48