EE-SPZ401W-02 Omron, EE-SPZ401W-02 Datasheet - Page 12

• Manufacturer Part Number: EE-SPZ401W-02
• Description: OPTO SENSOR LIGHT-ON TRANS
• Manufacturer: Omron

Specifications of EE-SPZ401W-02

• Sensing Distance: 0.197" (5mm)
• Sensing Method: Through-Beam
• Output Configuration: NPN - Open Collector/Light-ON
• Mounting Type: Screw Mount
• Current - Supply: 15mA
• Voltage - Supply: 5 V ~ 24 V
• Package / Case: Module, Connector
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Response Time: -
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption, Lead free / RoHS Compliant
• Other names: EESPZ401W02

● Other Precautions
• Do not disconnect the Connector from the Sensor when power is
• Avoid installing the Sensor in the following locations to prevent
• Be sure to use the Sensor under the rated ambient temperature.
• The Sensor may be dissolved by exposure to organic solvents,
supplied to the Sensor. Doing so may damage the Sensor.
malfunction or product failure:
acids, alkali, aromatic hydrocarbons or chloride resin
hydrocarbons, causing deterioration in characteristics. Do not
expose the Sensor to such chemicals.
(1) Location exposed to high concentrations of dust, oil mist, etc.
(2) Locations exposed to corrosive gases
(3) Locations exposed directly or indirectly to water, oil, or
(4) Outdoors or locations exposed to intensive light, such as direct
chemical spray
sunlight
http://www.ia.omron.com/
Photomicrosensors Technical Guide
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
C-6