EE-SPZ401W-02 Omron, EE-SPZ401W-02 Datasheet - Page 5

• Manufacturer Part Number: EE-SPZ401W-02
• Description: OPTO SENSOR LIGHT-ON TRANS
• Manufacturer: Omron

Specifications of EE-SPZ401W-02

• Sensing Distance: 0.197" (5mm)
• Sensing Method: Through-Beam
• Output Configuration: NPN - Open Collector/Light-ON
• Mounting Type: Screw Mount
• Current - Supply: 15mA
• Voltage - Supply: 5 V ~ 24 V
• Package / Case: Module, Connector
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Response Time: -
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption, Lead free / RoHS Compliant
• Other names: EESPZ401W02

Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Make sure that this product is used within the rated ambient
environment conditions.
● Installation
The connection force of the fiber and the Photomicrosensor will
decrease when the ambient temperature is high. If high ambient
temperatures can be expected, install the fiber with a holder or clip,
and do not pull on the fiber.
Install the fiber with a holder or clip.
● Wiring
● Adjustment
• A fiber that has been once connected cannot be disconnected for
• Connection is made using a Connector. Do not solder to the pin
• When extending the cable, use an extension cable with conductors
• To use a cable length longer than 5 m, attach a capacitor with a
• The sensing distance of the EE-SPZ301Y-01 and EE-SPZ401Y-01
• When the EE-SPZ301Y-01 and EE-SPZ401Y-01 detect a piece of
reuse.
(lead).
having a total cross-section area of 0.3 mm
must be 5 m maximum.
capacitance of approximately 10 μF to the wires as shown below.
The distance between the terminal and the capacitor must be within
5 m.
(Use a capacitor with a dielectric strength that is at least twice the
Sensor's power supply voltage.)
must be 1 mm maximum or operation will become unstable. Always
operate at a distance of minimum 1 mm.
white paper with a reflection factor of 90%, the sensing distance
varies from 4 to 10 mm depending on the product. The background
object must not be glossy.
Precautions for Correct Use
http://www.ia.omron.com/
OUT
5 m max.
A capacitor of
10 μF min.
WARNING
5 to 24 VDC
0 V
+
−
2
. The total cable length
Extension cable
OUT
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
EE-SPZ
5