OPB990N11 TT Electronics/Optek Technology, OPB990N11 Datasheet - Page 4

• Manufacturer Part Number: OPB990N11
• Description: SWITCH SLOTTED OPT W/WIRE LEADS
• Manufacturer: TT Electronics/Optek Technology
• Series: Photologic®r

Specifications of OPB990N11

• Sensing Distance: 0.125" (3.18mm)
• Sensing Method: Transmissive
• Output Configuration: Totem Pole, Buffer
• Mounting Type: Chassis Mount
• Current - Supply: 15mA
• Voltage - Supply: 4.75 V ~ 5.25 V
• Response Time: 70ns
• Package / Case: Module, Pre-Wired
• Lead Free Status / RoHS Status: Lead free / RoHS non-compliant

Types OPB980, OPB990 Se ries
Op tek re serves the right to make changes at any time in or der to im prove de sign and to sup ply the best prod uct pos si ble.
Op tek Tech nol ogy, Inc.
Op tek As sem bly
Pho tologic
Photo In te grated Cir cuit
Sen sor Fam ily
Dis crete Shell Ma te rial
Des ig na tion
8 - Base Mount IR Trans mis sive
9 - Base Mount Opaque
Plas tic Dis crete Shell
With Wire Ter mi na tion
Plas tic Dis crete Shell
With Wire Ter mi na tion
1215 W. Crosby Road
PART NUM BER GUIDE
Elec tri cal Speci fi ca tion Varia tions
0 - Buff ered Totem- Pole Out put
1 - Buff ered Open- Collector Out put
2 - In verted Totem- Pole Out put
3 - In verted Open- Collector Out put
OPB 9 X X X X X
Car roll ton, Texas 75006
3-OTWO
Ap er ture Width In Front
of Sen sor
5 = 0.050" 1= 0.010"
Ap er ture Width In Front
of Emit ter
5 = 0.050"
Mount ing Con figu ra tions
T - Both Mount ing Tabs
N - No Mount ing Tabs
L - Sin gle Mount ing Tab
P - Sin gle Mount ing Tab
(972)323- 2200
Emit ter Side
Pho tologic
1= 0.010"
Side
Fax [phone]