MCF51MM256CLK Freescale Semiconductor, MCF51MM256CLK Datasheet - Page 5

• Manufacturer Part Number: MCF51MM256CLK
• Description: IC MCU 32BIT 256K FLASH 80LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF51MMr

Specifications of MCF51MM256CLK

• Core Processor: Coldfire V1
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, SCI, SPI, USB OTG
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 47
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x16b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-LQFP
• Processor Series: MCF51MM
• Core: ColdFire V1
• Data Bus Width: 32 bit
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: TWR-MCF51MM-KIT, TWR-SER, TWR-ELEV, TOWER
• Package: 80LQFP
• Device Core: ColdFire
• Family Name: MCF51MM
• Maximum Speed: 50.33 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Number Of Programmable I/os: 47
• Interface Type: I2C/SCI/SPI
• On-chip Adc: 8-chx16-bit
• On-chip Dac: 1-chx12-bit
• Number Of Timers: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

The following table describes the functional units of the MCF51MM256/128.
Freescale Semiconductor
Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
Measurement Engine
Mini-FlexBus
USB On-the-Go
CMT (Carrier Modulator Timer)
MCG (Multipurpose Clock Generator)
BDM (Background Debug Module)
CF1 CORE (V1 ColdFire Core)
PRACMP
COP (Computer Operating Properly)
IRQ (Interrupt Request)
CRC (Cyclic Redundancy Check)
DBG (Debug)
FLASH (Flash Memory)
IIC (Inter-integrated Circuits)
INTC (Interrupt Controller)
KBI1 & KBI2
LVD (Low-voltage Detect)
VREF (Voltage Reference)
RAM (Random-Access Memory)
RGPIO (Rapid General-purpose
Input/output)
Unit
Table 2. MCF51MM256/128 Functional Units
Single-pin high-priority interrupt (part of the V1 ColdFire core).
Supports standard IIC communications protocol and SMBus.
DAC (digital to analog converter) — Used to output voltage levels.
16-BIT SAR ADC (analog-to-digital converter) — Measures analog
voltages at up to 16 bits of resolution. The ADC has up to four differential
and 8 single-ended inputs.
OPAMP — General purpose op amp used for signal filtering or
amplification.
TRIAMP —- Transimpedance amplifier optimized for converting small
currents into voltages.
Measurement Engine PDB — The measurement engine PDB is used to
precisely trigger the DAC and the ADC modules to complete sensor
biasing and measuring.
Provides expansion capability for off-chip memory and peripherals.
Supports the USB On-the-Go dual-role controller.
Provides clocking options for the device, including a phase-locked loop
(PLL) and frequency-locked loop (FLL) for multiplying slower reference
clock sources.
Provides single pin debugging interface (part of the V1 ColdFire core).
Executes programs and interrupt handlers.
Analog comparators for comparing external analog signals against
each other, or a variety of reference levels.
Software Watchdog.
High-speed CRC calculation.
Provides debugging and emulation capabilities (part of the V1 ColdFire.
core)
Provides storage for program code, constants, and variables.
Controls and prioritizes all device interrupts.
Keyboard Interfaces 1 and 2.
Provides an interrupt to theColdFire V1 CORE in the event that the
supply voltage drops below a critical value. The LVD can also be
programmed to reset the device upon a low voltage event.
The Voltage Reference output is available for both on- and off-chip use.
Provides stack and variable storage.
Allows for I/O port access at CPU clock speeds. RGPIO is used to
implement GPIO functionality.
Infrared output used for the Remote Controller operation.
Function
Features
5