HEDS-9140#A00 Avago Technologies US Inc., HEDS-9140#A00 Datasheet - Page 4

• Manufacturer Part Number: HEDS-9140#A00
• Description: ENCODER OPTICAL GAP 3CH 500CPR
• Manufacturer: Avago Technologies US Inc.
• Series: HEDSr
• Type: Optical Encoderr

Specifications of HEDS-9140#A00

• Pulses Per Revolution: 500
• Termination Style: Terminal Pins
• Encoder Type: Optical
• Output Type: Quadrature with Index (Incremental)
• Voltage - Supply: 5VDC
• Actuator Type: Codewheel Not Included
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount
• Orientation: Vertical
• Number Of Channels: 3
• Mounting Style: PCB
• Supply Voltage: 5 V
• Product: Optical
• Technology: Rotary
• No. Of Channels: 2
• Rotational Speed Max: 30000rpm
• Encoder Resolution: 500CPR
• Supply Voltage Range: 4.5VDC To 5.5VDC
• Encoder Output: Square Wave Digital Pulse
• Operating Temperature Range: -40°C To +100°C
• Rohs Compliant: Yes
• Detents: No
• Motion: Rotary
• Index Output: Indexed
• Encoder Signal: Digital Square Wave
• Operating Supply Voltage (typ): 5VDC
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 100C
• Terminal Type: PC Pins
• Sensor Supply Voltage: 4.5VDC To 5.5VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 516-1888; HEDS-9140#A00; Q2585516A

Defi nitions
Count (N): The number of bar and window pairs or counts
per revolution (CPR) of the codewheel.
One Cycle (C): 360 electrical degrees (°e), 1 bar and win-
dow pair.
One Shaft Rotation: 360 mechanical degrees, N cycles.
Position Error ( ΔΘ): The normalized angular diff erence
between the actual shaft position and the position indi-
cated by the encoder cycle count.
Cycle Error (ΔC): An indication of cycle uniformity. The dif-
fer ence between an observed shaft angle which gives
rise to one electrical cycle, and the nominal angular in-
crement of 1/N of a revolution.
Pulse Width (P): The number of electrical degrees that
an output is high during 1 cycle. This value is nominally
180°e or 1/2 cycle.
Pulse Width Error (ΔP): The deviation, in electrical degrees,
of the pulse width from its ideal value of 180°e.
State Width (S): The number of electrical degrees be-
tween a transition in the output of channel A and the
Absolute Maximum Ratings
Storage Temperature, T
Operating Temperature, T
Supply Voltage, V
Output Voltage, V
Output Current per Channel, I
Shaft Axial Play .............................................................................±0.25 mm (±0.010 in.)
Shaft Eccentricity Plus Radial Play .......................................... 0.1 mm (0.004 in.) TIR
Velocity ............................................................................................................. 30,000 RPM
Acceleration ..........................................................................................250,000 rad/sec
Note:
1. Absolute maximums for HEDS-5140/6140 codewheels only.
4
CC
O
............................................................................................-0.5 V to V
.......................................................................................... -0.5 V to 7 V
S
........................................................................-40°C to +100°C
A
...................................................................-40°C to +100°C
OUT
.......................................................-1.0 mA to 5 mA
neighboring transition in the output of channel B. There
are 4 states per cycle, each nominally 90°e.
State Width Error (ΔS): The deviation, in electrical degrees,
of each state width from its ideal value of 90°e.
Phase (φ): The number of electrical degrees between the
center of the high state of channel A and the center of
the high state of channel B. This value is nominally 90°e
for quadrature output.
Phase Error (Δφ): The deviation of the phase from its ideal
value of 90°e.
Direction of Rotation: When the codewheel rotates in the
direction of the arrow on top of the module, channel A
will lead channel B. If the codewheel rotates in the oppo-
site direction, channel B will lead channel A.
Optical Radius (R
center of rotation to the optical center (O.C.) of the en-
coder module.
Index Pulse Width (P
that an index is high during one full shaft rotation. This
value is nominally 90°e or 1/4 cycle.
2[1]
CC
[1]
OP
): The distance from the codewheel’s
O
): The number of electrical degrees