DSPIC30F1010-30I/MM Microchip Technology, DSPIC30F1010-30I/MM Datasheet - Page 22

• Manufacturer Part Number: DSPIC30F1010-30I/MM
• Description: 6KB, Flash, 256bytes-RAM, 30MIPS, 21I/O, 16-bit Family,nanoWatt 28 QFN-S 6x6mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010-30I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCKDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.5.7
The ERASEP command erases the specified number of
rows of code memory from the specified base address.
The specified base address must be a multiple of 0x40.
Once the erase is performed, all targeted words of
code memory contain 0xFFFFFF.
Expected Response (2 words):
0x1900
0x0002
DS70284C-page 22
15
Opcode
Length
Num_Rows
Addr_MSB
Addr_LS
Note:
Opcode
Field
Num_Rows
12 11
ERASEP COMMAND
The ERASEP command cannot be used to
erase the Configuration registers or
device
code-protect Configuration registers can
only be erased with ERASEB, while the
device ID is read-only.
0x9
0x3
Number of rows to erase
MSB of 24-bit base address
LS 16 bits of 24-bit base address
ID.
Addr_LS
8 7
Description
CodeGuard
Length
Addr_MSB
Security
0
8.5.8
The QBLANK command queries the programming
executive to determine whether the contents of code
memory is blank (contains all ‘1’s). The size of code
memory to check must be specified in the command.
The Blank Check for code memory begins at 0x0 and
advances toward larger addresses for the specified
number of instruction words.
The QBLANK command returns a QE_Code of 0xF0 if
the specified code memory is blank. Otherwise,
QBLANK returns a QE_Code of 0x0F.
Expected Response (2 words for blank device):
0x1AF0
0x0002
Expected Response (2 words for non-blank device):
0x1A0F
0x0002
15
Opcode
Length
PSize
Reserved
DSize
Note:
Reserved
Opcode
Field
12 11
QBLANK COMMAND
The QBLANK command does not check
the system Configuration registers. The
READD command must be used to
determine the state of the Configuration
registers.
0xA
0x3
Length of program memory to check
(in 24-bit words), max of 49152
0x0
Length of data memory to check
(in 16-bit words), max of 2048
© 2010 Microchip Technology Inc.
PSize
Description
Length
DSize
0