DSPIC30F3011-20E/PT Microchip Technology, DSPIC30F3011-20E/PT Datasheet - Page 8

• Manufacturer Part Number: DSPIC30F3011-20E/PT
• Description: IC,DSP,16-BIT,CMOS,TQFP,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F3011-20E/PT

• Rohs Compliant: YES
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 24KB (8K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC30F006 - MODULE SKT FOR DSPIC30F 44TQFPAC164305 - MODULE SKT FOR PM3 44TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC30F3010/3011
12. Module: Quadrature Encoder Interface
DS80389B-page 8
The Index Pulse Reset mode of the QEI does not
work properly when used along with count error
detection. When counting upwards, the POSCNT
register will increment one extra count after the
index pulse is received. The extra count will
generate a false count error interrupt.
Work around
There are multiple ways to work around this issue,
depending on the specific requirements of the
application:
1. Ignore count error interrupts when the counting
2. The user may disable count error interrupts by
3. The user may disable the index pulse reset
direction is upwards and the POSCNT register
has the value of MAXCNT + 1.
setting the CEID bit in the DFLTCON register.
feature
(QEICON<2>). Writing QEICON = 0x0600 will
provide a QEI interrupt each time an index
pulse is received, but the POSCNT register will
not be modified. The POSCNT register value
can be read in the QEI interrupt handler and
used as an offset value to calculate the
absolute position of the encoder disc with
respect to the index pulse.
by
clearing
the
POSRES
bit
13. Module: INT0, ADC and Sleep Mode
14. Module: 8x PLL Mode
ADC event triggers from the INT0 pin will not
wake-up the device from Sleep mode if the SMPI
bits are non-zero. This means that if the ADC is
configured to generate an interrupt after a certain
number of INT0 triggered conversions, the ADC
conversions will not be triggered and the device
will remain in Sleep. The ADC will perform
conversions and wake-up the device only if it is
configured to generate an interrupt after each INT0
triggered conversion (SMPI<3:0> = 0000).
Work around
None. If ADC event trigger from the INT0 pin is
required, initialize SMPI<3:0> to ‘0000’ (interrupt
on every conversion).
If 8x PLL mode is used, the input frequency range
is 5 MHz-10 MHz instead of 4 MHz-10 MHz.
Work around
None. If 8x PLL is used, make sure the input
crystal or clock frequency is 5 MHz or greater.
© 2008 Microchip Technology Inc.