2300SA-8 ARTISAN CONTROLS, 2300SA-8 Datasheet - Page 2

• Manufacturer Part Number: 2300SA-8
• Description: SOLID STATE TIMER, DPDT, 1024H, 115VAC
• Manufacturer: ARTISAN CONTROLS

Specifications of 2300SA-8

• Contact Configuration: DPDT
• Nom Input Voltage: 115VAC
• Delay Time Range: 0.1s To 1024h
• Timing Adjustment: DIP Switch
• Relay Mounting: Plug In
• Supply Voltage: 115VAC
• Leaded Process Compatible: Yes
• Contact Form: DPDT
• Current, Rating: 12 A
• Function: Timing
• Mounting Type: PCB
• Number Of Pins: 8
• Relay Type: Solid State
• Repeatability: ±2%
• Standards: cULus, UL
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: 0 °C
• Termination: Plug-In
• Timer Type: Interval
• Timing Range: 0.1 to 102.4 sec., 1 to 1024 sec., 1 to 1024 min., 1 to 1024 hrs.
• Voltage, Control: 120 VAC
• Voltage, Rating: 125 VAC
• Time Range: 0.1 Sec. To 1024 Hr.
• Rohs Compliant: Yes
• Approval Bodies: CSA / UL
• Contact Rating: 12A At 125V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Notice: Artisan Controls Corporation assumes no responsibilty for customer's applications or product design. The information and data contained herein
is the sole and exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written
consent of Artisan Controls Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party
misusing this property.
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Wiring Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document © and Revision Date:
Time/Temperature Coefficient:
Operating Voltage Tolerance:
Model Number
Tel: [phone] • Fax: [phone] • Toll Free: 800-457-4950
Artisan Controls Corporation, 111 Canfield Ave. Bldg B15-18, Randolph, New Jersey 07869, USA
Contact Life Expectancy:
2300SA
Operating Temperature:
Output Relay Ratings:
Timing Repeatability:
Transient Protection:
Purchase Tolerance:
Agency Recognition:
Operating Voltage:
LINE 1
Operating Power:
Dielectric Rating:
V
Solid State Timers and Controllers
Recycle Time:
Timing Mode:
Terminations:
I S I T O U R W E B S I T E A T
Operating Voltage
-2 (12V DC)
-3 (24V AC/DC)
-8 (115V AC)
3
2
4
1
Microprocessor-based Interval.
Non-polar connection, see values below, 50/60 Hz for AC voltages.
Idle operating current < 10mA for all voltages. Nominal operating
current with relay output energized is 60mA @ 12VDC (-2), 30mA @ 24V
AC/DC (-3), 15mA @ 115VAC (-8).
-10%/+20%
-20°C to +65°C.
±2% or 20mS whichever is greater.
Better than ±2%.
Better than ±0.1%/°C.
75mSec minimum with relay on, 150mSec minimum with relay off.
DPDT contacts rated 12A resistive at 125VAC, 7A resistive at 250VAC/
30VDC.
30,000 cycles @ 12A/120VAC, 100,000 cycles @ 10A/120VAC or 7A/
240AC, 900 cycles/hour maximum w/resistive load.
Octal plug-in type.
750 Vrms between open contact sets, 1500 Vrms between contacts and
operating voltage terminals.
Protected by silicon transient suppressors responding to transients
within 1x10
Certified to UL Component-Appliance Controls ATNZ2 (US) and ATNZ8
(Can), UL File E47858.
April 14, 2009
5
8
6
7
-12
No Polarity on power inputs 2 & 7
seconds to a peak pulse power dissipation of 1500W.
48V and 230V units are available on special order
: www.artisancontrols.com
LOAD
LINE 2