3SB35002DA11 SIEMENS, 3SB35002DA11 Datasheet - Page 88

• Manufacturer Part Number: 3SB35002DA11
• Description: ACTUATOR
• Manufacturer: SIEMENS
• Series: 3SB3r

Specifications of 3SB35002DA11

• Colour: Black
• No. Of Positions: 3
• Insulation Resistance Voltage: 400V
• Proof Voltage: 5V
• Size: 22mm

■
Options
Order form supplement for customized equipment
To fill out the order form, please use our online configurator:
https://www.mall.automation.siemens.com
Guide for completing the order form supplement
1. Enter the Item No.
2. Enter the quantity required.
3. Enter the required Order No, e.g.:
7
7
7
7
Enter Order No. supplement for the 7th position
(No. of command points).
4. Enter data in the diagram.
4.1 Select actuators from the selection tables.
Enter the appropriate code. Mushroom pushbuttons of diameter
40 mm cannot be placed next to each other because of the
close spacing.
The purpose of the identification letter (A to F) on the inside of
the cover and base of the enclosure is to simplify ordering and
complementing of enclosures.
Should a command point not be required, state the code for a
blanking plug.
Please note IEC 60204-1/EN 60204-1 (VDE 0113 Part 1):
7
7
4.2 Specify contact blocks, lampholders and voltage reduc-
ers for each command point.
Select the codes for the desired equipment in accordance with
the relevant table and enter them in the appropriate column. For
the following devices, the quantity and type of required contact
blocks, lampholders etc. must be entered:
7
7
7
7
Illuminated pushbutton units and indicator lights are supplied
with a factory-fitted, integral LED. The colors of the LEDs corre-
spond to the color of the actuator.
The relevant selection table contains all the possible combina-
tions for 3-position actuators according to EN 50013. Enter the
appropriate code. If a different arrangement of contact blocks is
desired for a command point, this command point must be
ordered without contact blocks. The contact blocks must be
ordered separately and fitted into the enclosure.
The command points in the enclosure can be fitted with a maxi-
mum of 3 contact blocks or 2 contact blocks and 1 lampholder.
3SB38 0.–0AZ for molded-plastic enclosure, floor mounting
contact blocks
3SB38 0.–1AZ for molded-plastic enclosure, contact blocks
for front plate mounting
3SB38 0.–2AZ for metal enclosure, floor mounting contact
blocks
3SB38 0.–3AZ for metal enclosure, contact blocks for front
plate mounting
The OFF pushbutton should be black, the ON pushbutton
white. Illuminated pushbuttons should not be used as OFF
pushbuttons.
A yellow name plate must be used in conjunction with a red
EMERGENCY-STOP mushroom pushbutton according to
ISO 13850 or EN 418. This is available at an additional charge
(see 4.6).
Pushbuttons
Actuators with 2 positions
Illuminated pushbuttons
Indicator lights
3SB3 Pushbutton Units and Indicator Lights, 22 mm
4.3 Notes on special versions of equipment
Non-standard refers to equipment that differs from that listed in
this catalog, e.g.
7
7
4.4 Inscription of the labeling plates
Enter the text. Select labeling plates according to the ordering
data. If a blank plate is required, state "blank". The labeling
plates are delivered loose.
If no labeling plate is to be fitted, enter "without plate".
Labeling plates with a special text can be supplied at an
additional charge. Enter the text. The labeling plates will then be
delivered with the plates stuck to the cover of the enclosure.
The inscriptions have upper case initial letters.
4.5 Tick the position of the labeling plate for horizontal or
vertical mounting.
If no entry is made, the equipment will be supplied for vertical
mounting.
4.6 Special features (only if required)
Special features are, for example, loose delivered plates,
protective collars or versions of enclosures that differ from those
listed in this catalog. If required, tick for example the yellow
backing plate according to EN 60204 (VDE 0113 Part 1).
Enclosures with only one command point will then be supplied
with a yellow cover. Should the enclosure have more than one
command point, a yellow name plate will be factory fitted at point
"A". If the yellow name plate should be fixed to another command
point, please state which one this is to be.
4.7 Type of actuators
Specify here, whether an actuator made of molded-plastic or
metal should be fitted.
If this is not specified, molded-plastic actuators will be used with
molded-plastic enclosures and metal actuators will be used with
metal enclosures.
4.8 Connection system
Specify here whether contact blocks and lampholders should be
used with spring-loaded terminals or screw connection (box
terminals).
If this is not specified, elements with screw connection will be
used.
For AS-Interface enclosures, see catalog IK PI.
Vertical mounting
ON
ON
OFF
Insert labels for illuminated pushbuttons: Select and enter
Order No.
For lockable actuators: Special locks (= different Lock No.)
White or clear
White or green
Black or red
Customer-specific enclosures
Siemens LV 1 · 2006
Horizontal mounting
ON OFF ON
Enclosures
9/89