CV500RM211 Omron, CV500RM211 Datasheet - Page 32

• Manufacturer Part Number: CV500RM211
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500RM211

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Multiple-stage Pulling
Two-way Pulling
1, 2, 3...
With this method the cable is installed in one direction, but the cable is pulled
through the route in stages. The remainder of the cable is temporarily piled in
figure-eight layers at the end of each successive stage. A single stage might be
selected because it is a practical pulling distance or because it ends at a turn in
the route.
In the following example, a cable is laid in two stages which are separated by a
90
If it is impossible to install the cable in one direction because of restricted access
or sharp turns along the route, pull the cable in two directions from an intermedi-
ate point on the route.
Install the cable in one direction, remove the remaining cable from the reel and
pile it in figure-eight layers, and install that part of the cable in the opposite direc-
tion.
1. Pull or lay all of the required cable through stage #1 and pile the remaining
2. Pull or lay the second stage of the installation route from the turn, taking care
3. Repeat steps 1 and 2 for installation routes with 3 or more stages.
/
cable in figure-eight layers at the turn in the installation route.
not to tangle or twist the cable.
turn.
Stage #1
(1)
Stage #2
Intermediate point
(2)
(1)
Section 4-3