MINI-PS-100-240AC/5DC/3 Phoenix Contact, MINI-PS-100-240AC/5DC/3 Datasheet - Page 6

• Manufacturer Part Number: MINI-PS-100-240AC/5DC/3
• Description: POWER SUPPLY PRIMARY SWITCH MODE
• Manufacturer: Phoenix Contact

Specifications of MINI-PS-100-240AC/5DC/3

• Power Supply Type: Switch Mode
• Power Supply Output Type: Fixed
• No. Of Output Channels: 1
• Input Frequency: 65Hz
• Output Voltage: 5VDC
• Output Current: 3A
• Input Voltage: 85V To 265V
• Supply Voltage: RoHS Compliant
• No. Of Outputs: 1
• Supply Voltage Typ: 110V AC /
• Rohs Compliant: Yes

Power Supply, Primary Switch Mode, Narrow Design – MINI-PS-100-240AC/5DC/3
Connection Cable:
connectors. This reliable user-friendly connection
method enables quick device connection and safe
isolation of the electrical connection, if required.
Only operate connectors when the power is
switched off.
The following cable cross sections can be connected:
For reliable and safe-to-touch
connection: Strip 8 mm (0.31 in.)
from the connector ends.
connections L and N.
Protecting the Primary Side
specifications of EN 60 950. It must be possible to
switch off the device using a suitable disconnecting
device outside the power supply. For example, primary
side line protection could be used.
internal fuse is present.
Recommended Fuse:
equivalent).
6.3. Input (
1 1 1 1
2 2 2 2
6.2. Connection of Various Types of Network: 100 - 240 V AC Networks
The device is equipped with COMBICON
The 100 - 240 V AC connection is made using screw
The device must be installed according to the
Additional device protection is not required, as an
Circuit breaker 10 A or 16 A, Characteristic B (or
A suitable fuse must be fitted for DC applications.
Input:
Output:
TN-S network
L N
MINI
1 1 1 1
, Figure 9)
0.2 - 2.5
0.2 - 2.5
[mm
Solid
2
]
+
–
0.2 - 2.5
0.2 - 2.5
Flexible
[mm
2
]
L
N
PE
24 - 14
24 - 14
AWG
TN-C network
8 mm (0.31 in.)
PHOENIX CONTACT page 6 of 8
0.5 - 0.6
0.5 - 0.6
Torque
[Nm]
L N
MINI
+
–
If the internal fuse is blown, this is most
probably due to a device fault.
In this case, the device should be
checked in the factory.
L
PEN
1 1 1 1
TT network
L N
MINI
3 3 3 3
+
–
2 2 2 2
Figure 08
Figure 09
L
N