ADNK-7633 Avago Technologies US Inc., ADNK-7633 Datasheet - Page 43

• Manufacturer Part Number: ADNK-7633
• Description: A7630 Reference Design Kit
• Manufacturer: Avago Technologies US Inc.
• Type: Transceiver, Bluetooth 2.1+EDRr

Specifications of ADNK-7633

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Resolution_LED_Setting9
Size: 1 byte
USAGE: This register defines which resolution LED indicators light up when mouse is set to Resolution_Selection_9,
Resolution_LED_Setting10
Size: 1 byte
USAGE: This register defines which resolution LED indicators light up when mouse is set to Resolution_Selection_10,
Resolution_LED_Duration
Size: 1 byte
USAGE: This register defines the duration in which the resolution LED indicators work, in 80ms. The range is from 0 to
GPIO_state_ON_Resolution_LED
Size: 1 byte
USAGE: This register defines the GPIO value which causes the LED to turn on. The opposite value is used automatically
Resolution_LED_ON_Period
Size: 1 byte
USAGE: This register defines LED on period (in 80ms). The range is 0 to 255. The LED on period must not be greater than
Resolution_LED_OFF_Period
Size: 1 byte
USAGE: This register defines LED off period (in 80ms). The range is 0 to 255. The LED on period must not be greater than
Resolution_LED_Blink_On_Connection
Size: 1 byte
USAGE: This register defines whether to blink resolution LED after connection is established.
43
in 4-bit big-endian binary. Set to “0000” to disable LED indication for Resolution_Selection_9.
in 4-bit big-endian binary. Set to “0000” to disable LED indication for Resolution_Selection_10.
255. Set to 0 to disable the LED indicator. For example, 30 means the LEDs will be on for 2.4 seconds.
to turn it off. Only 0 and 1 are valid. For example, 1 means GPIO value “1” causes LED to turn on, and GPIO value
“0” causes LED to turn off.
the LED duration. For example, 10 means 0.8 second.
the LED duration. For example, 10 means 0.8 second.
Set to "True" to allow corresponding resolution LED to blink;
Set to "False" to disallow corresponding resolution LED to blink.
Default Value:
Default Value:
Default Value:
Default Value:
Default Value:
Default Value:
Default Value:
0000
0000
0
0
0
0
False