ADNS-5700-H3MB Avago Technologies US Inc., ADNS-5700-H3MB Datasheet - Page 32

• Manufacturer Part Number: ADNS-5700-H3MB
• Description: USB SoC 3B Optical Sensor
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-5700-H3MB

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Set_Idle
Default:
Addressed:
Configured:
Notes:
Set_Vendor_Test
Default:
Addressed:
Configured:
Notes:
32
21 0A xx rr 00 00 00 00
xx = 00 All reports
xx = 01 First report
rr = rate in multiples of 4mS
Accept
Accept
Accept
The third byte of the command is to select the Report ID. There is only one for the mouse – so,
using either 00 or 01 will work.
The fourth byte of the command sets the rate in multiples of 4mS. The initial value for mice will
be x00 which means “infinite” – that is packets only come out when there is a change in data.
Data will only be allowed to come out when the device is configured. However, the chip will
accept the command in Default or Addressed mode and use that value when the device is later
configured.
40 01 00 00 xx yy 00 00
xx = address
Accept
Accept
Accept
Address range for “xx” should be 0x00 to 0x3F. Addresses above this are reserved for possible
future use. See also Get_Vendor_Test.
yy = data