117630-06 AMETEK, 117630-06 Datasheet - Page 2

• Manufacturer Part Number: 117630-06
• Description: BLOWER, 145MM, 240V, 400W
• Manufacturer: AMETEK

Specifications of 117630-06

• External Height: 127mm
• Current Type: AC
• Supply Voltage: 240VAC
• Current Rating: 5A
• Flow Rate: 31l/s
• Power Connection Type: Leadwires
• Depth: 104.65mm
• External Length / Height: 127mm
• Outer Diameter: 145mm
• Flow Rate - Imperial: 65cu.ft/min
• Flow Rate - Metric: 522m3/h
• External Depth: 104.65mm

5.7” (145mm) BLDC Thru Flow Blower
400 WATT, 240 VOLT
Regulatory Agency Certification: Underwriters Laboratories, Inc. is qualified per UL507 under File E-94403; Canadian Standards Association is qualified per
C22.2#113 under File LR 43448.
Miscellaneous: Intake & exhaust tubes, all cooling ducts and vents must not be obstructed. Intake and exhaust are free of grease, oil, or foreign particles. Amp
housing #350809-1 (to be supplied by customer), mates with post header assembly.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The
performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft
3
air density (29.92” Hg @ 70° F.).
Actual performance will vary depending on the operating environment and application. AMETEK Rotron products are not designed for use with volatile, hazardous or
corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical
life support applications. AMETEK reserves the right to revise its products without notification.
35
5.7/400TFBHV99