CRT1-ATT02 Omron, CRT1-ATT02 Datasheet - Page 64

• Manufacturer Part Number: CRT1-ATT02
• Description: Bracket 8 Pt Slave Econ
• Manufacturer: Omron

Specifications of CRT1-ATT02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Flexible I/O Configuration Matched to the Application to Down-
size Panels, Lower Costs, and Reduce Wiring Work.
System Configuration
Internal Circuit Configuration
64
Remote I/O
communications
Data from the Slice I/O
Units connected to the
Communications Unit is
collected by the
Communications Unit, then
data is exchanged in
a single transmission with
the Master Unit.
SmartSlice GRT1-series
CompoNet
Communications Unit
included in lineup.
Simple wiring simply
by inserting ferrules.
No screwdrivers
required.
CompoNet Communications Unit
Power supply
24 V DC
*1
CompoNet Repeater Unit
Network
CS/CJ-series
CompoNet
Master Unit
Internal
circuits
I/O
power supply
GRT1-CRT
PLC
*2
I/O Power Feed Unit
GRT1-PD2
I/O
power supply
CompoNet
Communications Unit
GRT1-CRT
Left Turnback Unit
GRT1-TBL
Left Turnback Unit
GRT1-TBL
Unit internal circuits
SmartSlice GRT1-series
*2
CompoNet
Serial connection
(Settings, monitoring,
operation)
Use the same power supply as that for the Communications Unit.
Right Turnback Unit
GRT1-TBR
Turnback Unit (1 m) GCN2-100
Turnback Unit (1 m) GCN2-100
Note. Power is not supplied via
CX-One
Connector
Slave
the Turnback Cable.
Slice I/O Units
Connector
Right Turnback Unit
Set parameters and
perform maintenance
for Communications
Units and SmartSlice
I/O Units.
*1
GRT1-TBR
GRT1-END
End Unit *
Left Turnback Unit
GRT1-TBL
I/O
power supply
Right Turnback Unit
Internal
circuits
*2
GRT1-TBR
*1. The power consumption for each block must
*2. The I/O power supply must be 4 A max.
not exceed 80 W
Unit internal circuits
Mount up to 64 SmartSlice I/O Units
to each Communications Unit.
* The End Unit is sold separately.
One End Unit is required at the end.
Connect up to 64
SmartSlice I/O
Units to each
Communications
Unit.
Flexibly combine
SmartSlice I/O Units
for the require I/O
capacity, mixing inputs
and outputs, and
analog and digital.
Use Turnback
Units and Turnback
Cables to create
blocks and enable
fitting the system
into the panel.
End Unit
GRT1-END