CRT1-ATT02 Omron, CRT1-ATT02 Datasheet - Page 75

• Manufacturer Part Number: CRT1-ATT02
• Description: Bracket 8 Pt Slave Econ
• Manufacturer: Omron

Specifications of CRT1-ATT02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Specifications
● Slave Port Communications Power Supply Connector
This connector supplies communications power to Slave Units
and Repeater Units connected to the Slave port communications
connector (port 2).
Note: Communications power for the Repeater Unit is supplied from the BS+
Model
Communications ports
Maximum number of layers
Number of nodes per network
(per Master Unit)
Number of nodes per trunk line
or sub-trunk line
Communications power supply
connector
Communications power supply
connector allowable current
capacity
Noise immunity
Vibration resistance
Shock resistance
Dielectric strength
Insulation resistance
Ambient operating temperature −10 to 55°C
Ambient operating humidity
Ambient operating atmosphere No corrosive gases
Storage temperature
Storage humidity
Installation
Weight
Communications power supply
voltage
Communications power supply
current consumption
BS+
BS−
and BS− terminals on the upstream port communications connector (port
1).
Communications power supply +
Communications power supply −
Item
CRS1-RPT01
Upstream port (port 1): Ttrunk line or sub-trunk line
Downstream port (port 2): Sub-trunk line (Can be wired with the same communications specifications as the Master Unit.)
Different types of communications cable can be connected to the upstream and downstream ports.
Up to two extra segment layers can be created from the Master Unit.
64 nodes
32 nodes (Including Slave Units)
One downstream communications port power supply connector
Note: Communications power for the Repeater Unit is supplied from the BS+ and BS- terminals on the upstream port communica-
5 A max.
Conforms to IEC 61000-4-4 2 kV (power line).
10 to 150 Hz with double-amplitude of 0.7 mm or 50 m/s
150 m/s
500 VAC (between isolated circuits)
20 MΩ min. (between isolated circuits)
25% to 85% (with no condensation)
−25 to 65°C
25% to 85% (with no condensation)
DIN Track or M4 screws
73 g
14 to 26.4 VDC
95 mA max.
tions connector (PORT1).
2
Recommended Ferrules
The following ferrules are recommended for the communications
power supply cable.
The following screwdriver is recommended for use when remov-
ing ferrules.
Product number
AI0,5-10 WH
H0.5/16 orange
XW4Z-00C
2
Specification
Product number
0.5 mm (AWG20)
0.5 mm (AWG20)
power cable size
Applicable
Repeater Unit
OMRON
CRIMPFOX UD6
(Product No. 1204436)
or CRIMPTFOX ZA3
series
Crimper PZ1.5
(Product No. 900599)
CRS1-RPT01
Crimping tool
Manufacturer
Phoenix
Contact
Weidmuller
Manufacturer
75