FS2003(UN) Equinox Technologies, FS2003(UN) Datasheet - Page 20

• Manufacturer Part Number: FS2003(UN)
• Description: PROGRAMMER, ISP
• Manufacturer: Equinox Technologies

Specifications of FS2003(UN)

• Mcu Supported Families: Atmel AT89S, Atmega, AVR, Attiny, Philips T89C51Rx2, P89C51Rx2, P89C66x
• Programmer Type: ISP
• External Depth: 31mm
• Height: 189mm
• Length: 80mm
• Weight: 0.75kg

1.6 DC Power Input Connector (CON1)
It is possible to power the programmer from an external power supply by plugging the DC Power
Cable supplied with the programmer into CON1. This connector is a 2.5mm jack socket.
Fig. 1.6.1 CON1 – pin-out
Description
Centre pin
Outer
1.7 DC Power Cable Specification
The programmer is supplied with a DC power cable which plugs into CON1. The other end of this
cable is supplied with bare wire ends for connecting to an external power supply. e.g. bench PSU.
Cable Specification:
FS2003 ISP Programmer - User Guide V1.01 – 4th February 2004
•
•
•
•
•
One end features a female 2.5mm DC jack plug
The other end of the cable is supplied with bare wire ends for connecting to an external power
supply. e.g. bench PSU.
The black lead with the white stripe is the +VE cable.
The all black lead is the GROUND cable.
The external voltage applied to CON1 must be between 9.0 and 12.0V !
Voltage
+9.0V to +12.0V from external power supply
0V (Ground connection)
9