CS4207-CNZ Cirrus Logic Inc, CS4207-CNZ Datasheet - Page 58

• Manufacturer Part Number: CS4207-CNZ
• Description: IC Low Pwr,4/6 HD Aud Codec W/HP Amp
• Manufacturer: Cirrus Logic Inc
• Type: Audio Codecr

Specifications of CS4207-CNZ

• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 3
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 105 / 110
• Voltage - Supply, Analog: 2.97 V ~ 5.25 V
• Voltage - Supply, Digital: 2.97 V ~ 5.25 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 598-1796

58
6.5.12 Converter Stream, Channel
6.5.13 Converter Format
power state transition). Within this type of node, this field will be the lower power consuming state of either
a) the PS-Set field of the currently referenced node or b) the PS-Set field of the Audio Function Group
node under which the currently referenced node was enumerated (is controlled).
Get Parameter Command Format:
Set Parameter Command Format:
Response Format:
Get Parameter Command Format:
Set Parameter Command Format:
Response Format:
Bits [15:0] must be programmed by software with the same value programmed into the Stream Descriptor,
so that the data format being transmitted on the link matches what is expected by the consumer of the
data.
Bits [31:28]
Bits [31:28]
Bits [31:28]
Bits [31:28]
CAd = X
CAd = X
CAd = X
CAd = X
31:8
Bits
7:4
3:0
ADC1 Node ID=05h
ADC2 Node ID=06h
ADC1 Node ID=05h
ADC2 Node ID=06h
ADC1 Node ID=05h
ADC2 Node ID=06h
ADC1 Node ID=05h
ADC2 Node ID=06h
Bits [27:20]
Bits [27:20]
Read/Write
Read/Write
Bits [27:20]
Bits [27:20]
Read Only
Type
Verb ID = A00h
Verb ID = F06h
Verb ID = 706h
Verb ID = 2xxh
Bits [19:8]
Bits [19:8]
Bits [19:8]
Bits [19:8]
000000h
Default
0h
0h
Reserved
Stream Number (SN): This field is written by
software to indicate the stream number used by
the Input Converter. “0h” is stream 0, “1h” is
stream 1, etc.
By convention, stream 0 is reserved and unused
so that converter whose stream number has
been reset to “0h” does not unintentionally
decode data not intended for them.
Lowest Channel Number (LCN): This field is
written by software to indicate the lowest channel
used by the Input Converter. The stereo con-
verter will use this LCN value plus 1 for its left
and right channel.
Parameter ID = 00h
Parameter ID = 00h
Parameter ID = xxh
Parameter ID = xxh
Description
Bits [7:0]
Bits [7:0]
Bits [7:0]
Bits [7:0]
CS4207
DS880F1