DRT2-MD32B Omron, DRT2-MD32B Datasheet - Page 252

• Manufacturer Part Number: DRT2-MD32B
• Description: 16In,16Out Horiz MIL Conn NPN
• Manufacturer: Omron

Specifications of DRT2-MD32B

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Dimensions
5-7-9
Mounting to a DIN
Track
Screw-less Clamp Terminals
Mounting to a Control Panel
Note
1. The I/O power supply’s right-side and left-side V terminals, and the right-
2. When using inductive loads (such as solenoid valves), use a load with a
3. Wire colors have been changed according to revisions in the JIS standards
A Remote I/O Terminal (either a Basic Unit or Expansion Unit) can be
mounted to a control panel as shown below.
Mount a 35-mm DIN Track to the rear panel of the Slave. Firmly insert the
Slave into the DIN Track while pulling down the DIN Track mounting hooks on
the rear panel with a screwdriver. Secure the Slave on the right and left sides
between a pair of end plates.
side and left-side G terminals, are not connected internally. Supply power
separately between V and G on the right and left sides respectively.
built-in diode to absorb reverse power or attach a diode externally
for photoelectric and proximity sensors. The colors in parentheses are the
wire colors prior to the revisions.
245
Section 5-7
231