DRT2-MD32B Omron, DRT2-MD32B Datasheet - Page 416

• Manufacturer Part Number: DRT2-MD32B
• Description: 16In,16Out Horiz MIL Conn NPN
• Manufacturer: Omron

Specifications of DRT2-MD32B

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting Using the DeviceNet Configurator
Temperature Input Terminals
1,2,3...
1,2,3...
Note Priority is given to settings in the Master, so the setting for the Slave’s default
■ Allocating User-defined I/O Data (Any I/O Data Combination)
1. Double-click the icon of the Temperature Input Terminal to be set in the
2. Click the General Tab and select the desired I/O data (pattern) from the
3. Click the Download Button and then click the Reset Button to reset the
4. Click the OK Button and exit the window.
The temperature data selected from the data on which math operations have
been performed can be allocated in the Master with other data such as Status
Flags, in any combination. The Configurator can be used to allocate two data
patterns in the Master with any combination.
This method is supported by CS/CJ-series DeviceNet Master Units only.
connection path is not required.
Use the following method to allocate data from the Configurator.
1. Double-click the icon of the Master Unit to which I/O will be allocated and
Main Window and open the Edit Device Parameters Window. (From the
Maintenance Mode Window, click the right mouse button over the Slave
icon and select Parameters and Edit.)
pull-down menu under the Default Connection Path (in) field. In the follow-
ing example, the Generic Status flags are allocated.
Unit.
open the Edit Device Parameters Window. (From the Maintenance Mode
Window, click the right mouse button over the Master Unit icon and select
Parameters and Edit.)
Section 7-6
395