3G2A5-DA002 Omron, 3G2A5-DA002 Datasheet - Page 46

• Manufacturer Part Number: 3G2A5-DA002
• Description: C500 2-D/A: 0 TO +10V
• Manufacturer: Omron

Specifications of 3G2A5-DA002

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Memory Packs
How to Install the Memory
Pack
!
Caution
1, 2, 3...
Take the following steps to install the Memory Pack in the CPU.
Do not attempt to install the Memory Pack in the CPU while the power to the PC
is ON. Doing so may cause data to be lost, or may damage the CPU or Memory
Pack.
1. Turn the power to the PC OFF.
2. Using a standard screwdriver, remove the Memory Pack compartment
3. When using the RAM Pack, make sure the write-protect switch is set before
4. Insert the Memory Pack (component side facing left) into the Memory com-
5. Reattach the memory compartment cover.
cover located on the front panel of the CPU. Push in the latch on the cover
and slide the cover upward.
installing the Unit in the CPU. Refer to the following table for the status of the
write-protect function.
partment. When the Unit is almost completely inserted into the CPU, there
may be a slight resistance as the Memory Pack connector mates with the
connector inside the CPU. Continue pushing on the Memory Pack until it is
inserted completely into the CPU.
Write-protect switch
Write-protect LED indicator
Use a standard screwdriver to remove the Memory
Pack compartment cover.
OFF
Unlit
Write enabled
Memory Unit guide
Memory Unit holding brackets
Mounting screws for Memory
Unit holding bracket
ON
Lit
Memory Pack
(ROM or RAM
Pack)
Write disabled
Section 3-4
33