61F-GP-NH AC100 Omron, 61F-GP-NH AC100 Datasheet - Page 50

• Manufacturer Part Number: 61F-GP-NH AC100
• Description: LEVEL CONTROL
• Manufacturer: Omron
• Series: 61Fr
• Type: Level Control - High Sensitivityr

Specifications of 61F-GP-NH AC100

• Applications: Supply and Drain Control
• Mounting Type: Socket Mount (11 pos)
• Voltage - Supply: 100 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 61F-GP-NHAC100; 61FGPNHAC100

61F
How to Mount Electrodes
Connecting Electrodes to Electrode Holders
Note: 1. When the distance between E1 and E3 exceeds 1 m for supplying purified city water, for example, locate a second E3 within 200 mm
1.
PH-1
(See Notes 1 and 2)
Lock nut
Electrode Holder and Electrodes
PH-1/PH-2 Electrodes
Electrode
Spin a locknut and a spring
washer onto the Electrode.
2. Even when the distance is less than 1 m, the product may not operate due to the water quality.
of E1.
Note: Clamp screw and spring washer are not
Connecting nut
200 mm max.
provided for the BS-1T Electrode Holder
(titanium, hastelloy B, or hastelloy C).
2.
Fully fit the Electrode into the
connecting nut attached to
the Electrode Holder.
Control range
4.
3.
Spring washer (see note)
Electrode Holder
Clamp screw
Secure the connecting nut by
tightening the lock nut and
spring washer.
Tighten the Electrode with the
two clamp screws. (see note)
PH-2
E3
(black)
E2
(white)
Control range
E1
(white)
Connecting One Electrode to Another
When a long Electrode is required, use two or more Electrodes by
jointing them with a connecting nut and two lock nuts at intervals of
1 m.
5 mm
Spring
washer
1.
Spin a locknut and a spring
washer onto each Electrode
end.
Electrode
Lock nut
Spring washer
Connecting nut
3.
2.
4.
Tighten the Electrodes with
the two clamp screws.
Fit each Electrode into the
connecting nut so that the
ends of the two respective
Electrodes contact with one
another at the center of the
connecting nut.
Secure the connecting nut
with the two lock nuts and
two spring washers. at both
ends of the connecting nut.
61F