E2C-JC4DH Omron, E2C-JC4DH Datasheet - Page 6

• Manufacturer Part Number: E2C-JC4DH
• Description: DC AMP, M12 E2C-H HiTemp PROX
• Manufacturer: Omron
• Series: E2Cr

Specifications of E2C-JC4DH

• Amplifier Type: Standard
• Voltage - Supply: 12 V ~ 24 V
• Output Type: NPN
• Current - Supply: 45mA
• Mounting Type: Bracket Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E2CJC4DH

E2C-H
E2C-JC4_H
Amplifier Mounting Bracket (supplied with each unit)
Unit: mm (inch)
Installation
Do not tighten the nut with excessive force. A washer must
be used with the nut.
Note: The above torque values apply when you use a
Model
E2C-X1R5AH
E2C-X2AH
E2C-X5AH
toothed washer with the nut that you tighten.
Note: 1. Use the caution label to prevent improper operation after sensitivity adjustment.
Torque
20 kgf • cm (17.3 in-lbs)
60 kgf • cm (52 in-lbs)
150 kgf • cm (130 in-lbs)
2. The mounting bracket is not required when DIN-track mounting.
3. Cord: 4.5 dia. (OD), 4-conductor, vinyl-insulated round cord, standard length: 2 m (6.45 ft)
(It is possible to extend the cord up to 200 m using an independent metal conduit).
7
Effects of Surrounding Metal
When mounting the E2C-H within a metal panel, ensure that the
clearances given in the following table are maintained. Failure to
maintain these distances may cause deterioration in the
performance of the sensor.
Model
E2C-X1R5AH
E2C-X2AH
E2C-X5AH
l
m
l
0 mm
(0.0 in)
0 mm
(0.0 in)
0 mm
(0.0 in)
d
8 mm
(0.31 in)
12 mm
(0.47 in)
18 mm
(0.71 in)
D
d dia.
D
0 mm
(0.0 in)
0 mm
(0.0 in)
0 mm
(0.0 in)
E2C-H
m
4.5 mm
(0.18 in)
6 mm
(0.24 in)
15 mm
(0.59 in)