E2C-JC4DH Omron, E2C-JC4DH Datasheet - Page 7

• Manufacturer Part Number: E2C-JC4DH
• Description: DC AMP, M12 E2C-H HiTemp PROX
• Manufacturer: Omron
• Series: E2Cr

Specifications of E2C-JC4DH

• Amplifier Type: Standard
• Voltage - Supply: 12 V ~ 24 V
• Output Type: NPN
• Current - Supply: 45mA
• Mounting Type: Bracket Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E2CJC4DH

E2C-H
Mutual Interference
When installing two or more E2C-H sensors face to face or side
by side, ensure the minimum distances given in the following
table are maintained.
Mounting
Mount the front panel to a DIN track or mounting bracket first,
and then mount the rear part. The mounting bracket is provided
with the E2C-H.
Removal
You can remove the E2C-H by pulling the yellow grip rail on the
lower part of the rear panel with a flat-blade screwdriver.
Miscellaneous
Do not expose the sensor to steam or install it in places where
water may be sprayed because the sensor is not water resistive.
Do not cut or extend the sensor cord or the sensor will not
maintain its characteristics.
After you adjust the sensing distance, apply the caution label
(provided with the E2C-H) to the amplifier and cover the surface
of the sensitivity adjuster hole.
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
Cat. No. CEDSAX4
Model
E2C-X1R5AH
E2C-X2AH
E2C-X5AH
A
Front
A
20 mm (0.79 in)
30 mm (1.18 in)
50 mm (1.97 in)
B
Rear
11/01
DIN-track or mounting bracket
B
15 mm (0.59 in)
20 mm (0.79 in)
35 mm (1.38 in)
Rail grip (yellow)
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
Specifications subject to change without notice.
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
Printed in the U.S.A.
E2C-H