G3RD-X02PN DC24 Omron, G3RD-X02PN DC24 Datasheet - Page 24

• Manufacturer Part Number: G3RD-X02PN DC24
• Description: OUTPUT MODULE
• Manufacturer: Omron
• Series: G3RDr

Specifications of G3RD-X02PN DC24

• Circuit: SPST-NO (1 Form A)
• Output Type: DC
• Load Current: 2A
• Voltage - Input: 19.2 ~ 28.8VDC
• Voltage - Load: 3 ~ 52.8 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• On-state Resistance: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: G3RD-X02PNDC24; G3RDX02PNDC24; G3RDX02PNDC24NC

Drip-proof Switch (Z-@55)
Split-contact Switch (Z-10F@Y)
The applicable current varies depending on how the contacts are
used. If the Switch is connected in series, the Switch can endure a
current 1.5 to 2 times higher than the current that can be applied in
parallel connection.
Flexible Rod Switch (Z-15@NJ@55, Drip-proof)
Accessories (Order Separately)
Refer to Z/A/X/DZ Common Accessories for details about Terminal Covers, Separators, and Actuators.
The Drip-proof Terminal Protective Cover is provided for maintenance for Z-@A55-B5V Switches.
Ordering Information
• The Switch is not perfectly oil-tight; so do not dip it in oil or water.
• The rubber boots are made from weather-resistive chloroprene
• Do not use Basic Switches in places with radical changes in
• Rubber boots and rubber caps will tend to harden at lower ambient
• When the rod is fully swung, the Switch may operate when the lever
Drip-proof Terminal
Cover (Order Separately)
Drip-proof Terminal
Protective Cover
rubber.
temperature.
temperatures. If an Actuator is used in a pressed state for an
extended period of time at low temperatures, it may return slowly or
it may not return at all. OMRON can provide special Actuators for
use at low temperature with rubber boots or rubber caps made of
silicon rubber, which has superior resistance to cold. Ask your
OMRON representative for details.
Name
AP-DV
Model
Dimensions
27.9
17.4
15
0.6
Other Precautions
• Do not switch the rod to the fullest extent when the Switch is to
• Do not apply excessive force with a screwdriver or other tool when
• The Drip-proof Terminal Protective Cover can be sued only with
• Only the Terminal Protective Cover is available for maintenance.
returns, causing chattering. Use a circuit that compensates for
chattering wherever possible.
break a power circuit because such a practice may cause metal
deposition to occur between the mating contacts of the Switch.
attaching or removing the Protective Cover. Doing so may deform
the Switch.
Switches with model numbers ending in “-B5V.”
48.5
51.6
＋1
−2
9
Mounting bracket
29.5
±1
13.5 dia.
17 dia.
7.5
Screwdriver
17.4
11
17.4
(Unit: mm)
24
Z