8432180000 Weidmuller, 8432180000 Datasheet - Page 3

• Manufacturer Part Number: 8432180000
• Description: WTS4 PT100/2,V,0-10V
• Manufacturer: Weidmuller

Specifications of 8432180000

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Analogue Signal Processing
2-way-isolation separates the signals galvanically and decouples the measurement
circuits. In so doing it eliminates potential differences caused by long cable lengths and
common reference points. Furthermore, the galvanic isolation offers protection against
destruction by overvoltage, and against inductive and capacitive interferences.
3-way-isolation also decouples the supply voltage from the input and output circuits,
and enables the function with only one operating voltage.
The passive isolator offers a further elementary advantage; it needs no additional volt-
age supply. The supply to the modules ensues via the input circuit and is the trans-
ferred to the output. This current loop supply is distinguished by very low power con-
sumption.
There are a large number of products available for measuring temperatures. RTD
PT100 signals, in 2-, 3- and 4-wire technology, are converted to standardised 0 – 20
mA, 4 – 20 mA and 0 – 10 V signals.
The modules which can be connected to commercially available thermocouples have
cold junction compensation as standard. Furthermore, the modules amplify and linea-
rize the voltage signals from the thermocouple. This guarantees an exact conditioning
of analogue signals by eliminating sources of interference and errors.
Frequency converters convert frequencies to standard analogue signals. This
enables controllers connected in series to directly process impulse trains when making
speed or rotational speed measurements.
It is inconceivable to think about automation without analogue-digital-analogue
converters. To bring together the aforementioned analogue form of describing the envi-
ronment and the customary digital processing, within the framework of process moni-
toring, it is necessary to convert analogue signals into digital signals. Weidmüller offers
modules for the following standard input and output signals: 0...20 mA, 4...20 mA and
0...10 V. 8-bit and 12-bit digital modules are available. All modules have an added input
for making instantaneous measurements.
Current monitoring modules enable the monitoring of current values up to 60 A in
alternating or direct voltages. Over range or under range values trip the switching out-
put. Modules with analogue outputs enable the continuous monitoring of currents via
connected controls.
Voltage monitoring modules can be used to monitor direct and alternating voltages.
Voltage fluctuations, resulting from switching operations or network overloads, can be
reliably recognised and reported via the adjustable threshold function.
Modules for monitoring of revolutions and torque enable the control of cyclic move-
ments on conveyor belts, ventilators and pumps. The output responds after a set
amount of time, should the expected impulse not be received. The reliable potential-
free relay contact, signalises the interference to the responsible component group.
158