MS3476L16-26P Conesys, MS3476L16-26P Datasheet - Page 2

• Manufacturer Part Number: MS3476L16-26P
• Description: Conn MIL-DTL-26482 Circular PIN 26 POS Crimp ST Cable Mount 26 Terminal 1 Port
• Manufacturer: Conesys
• Type: MIL-DTL-26482 Circularr

Specifications of MS3476L16-26P

• Gender: PL
• Termination Method: Crimp
• Mounting: Cable Mount
• Body Orientation: Straight

Performance Specifications
Operating Temperature Range
Classes A, L and S*: -55°C to +200°C (-67°F to +392°F)
Classes W and ZC*: -55°C to +175°C (-67°F to +347°F)
Material and Finish Data (Class)
A – aluminum shell, black anodized finish
L – aluminum shell, electroless nickel finish
W – aluminum shell, olive drab cadmium over nickel base
S* – stainless steel shell, passivated
ZC*– aluminum shell, zinc cobalt finish
Corrosion Resistance
Classes A, S*, W and ZC* withstand 500-hour salt spray.
Class L withstands 48-hour salt spray.
Environmental Seal
Wired, mated connectors with specified accessories
attached, shall meet the altitude-immersion test specified in
MIL-DTL-26482 Series 2.
Fluid Resistance
Connectors resist specified immersions in MIL-PRF-7808
(lubricating oil), MIL-PRF-23699 (lubricating oil),
MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil,
Coolanol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I
(defrosting fluid), MIL-DTL-5624 (JP-5), and solvents
specified in Method 215 of MIL-STD-202.
* Not on QPL, can be supplied to Aero-Electric P/N only.
Voltage Rating
** To be used by designer only as a guide.
www.conesys.com
Service
MIL-DTL-26482
Performance Specifications
Series 2
Rating
II
I
Suggested Operating Voltage**
AC (RMS)
1,000
600
(Sea Level)
1,275
850
DC
Test Voltage
–
Sea Level
V RMS
70
1,500
2,300
–
Durability
Mated connectors withstand a minimum of 250 mating
cycles for RFI plug (MS3475) and 500 cycles for standard
plug (MS3476).
Shock and Vibration Requirements
Wired, mated connectors shall not be damaged, coupling
ring shall not loosen, and there shall be no interruption of
electrical continuity longer than one microsecond when
subjected to the following:
Shock
Mated connectors withstand a pulse of approximate half
sine wave of 300 G magnitude with duration of three
milliseconds applied in each direction of the three major axes.
Vibration
Mated connectors withstand the following vibration levels:
G
Shielding Effectiveness
RFI attenuation at the specified frequency meets the
requirements of MIL-DTL-26482 Series 2.
G
Shell-to-Shell Conductivity
G
G
Random vibration per MIL-STD-202, method 214, test
condition II, letter J.
RFI shielding effectiveness of mated connectors with
RFI backshells is measured in a triaxial radio frequency
leakage fixture.
With RFI spring fingers, the maximum potential drop
shall not exceed 5 millivolts.
Without spring fingers, the maximum potential drop
shall not exceed 200 millivolts.
Test Voltage
50,000 Ft.
V RMS
500
750
Test Voltage
70,000 Ft.
V RMS
375
500
sales
@
aero-electric.com
Test Voltage
110,000 Ft.
V RMS
200
200