MS3476L16-26P Conesys, MS3476L16-26P Datasheet - Page 3

• Manufacturer Part Number: MS3476L16-26P
• Description: Conn MIL-DTL-26482 Circular PIN 26 POS Crimp ST Cable Mount 26 Terminal 1 Port
• Manufacturer: Conesys
• Type: MIL-DTL-26482 Circularr

Specifications of MS3476L16-26P

• Gender: PL
• Termination Method: Crimp
• Mounting: Cable Mount
• Body Orientation: Straight

* Not on QPL, can be supplied to Aero part number only. Consult factory
Note 1:
ordered less contacts (L/C) as follows: One spare contact for
inserts requiring 2 to 26 of each contact and two spares for
inserts with 27 or more of each size, and a minimum of one
sealing plug up to 15% of the number of contacts. In addition,
one plastic insetion/removal tool of each size is included.
www.conesys.com
Mil. Prefix
Aero Prefix
Shell type
Class (Material and Finish)
Shell Size
Insert Arrangement
Contact Style
Polarization
Modification (applies to Aero part numbers only)
for availability.
70
71
72
74
75
76
A
L
W
S* = Stainless steel shell, passivated (Aero part number only)
ZC* = Aluminum shell, zinc cobalt finish (Aero part number only)
8, 10, 12, 14, 16, 18, 20, 22
See pages 82 thru 85
P
S
A
B
N
W, X, Y
01
340
341
342
Consult factory for other modifications
= Aluminum shell, electroless nickel finish
= Socket
= Pin
= Socket connector less sockets (with intent to use non-std contacts)
= Aluminum shell, black anodized finish (not available in RFI plug)
= Pin connector less pins (with intent to use non-std contact)
= Aluminum shell, olive drab cadmium over electroless nickel base
= Normal (not included in part number)
= Narrow flange receptacle
= Cable connecting receptacle
= Wide flange receptacle
= Jam nut receptacle
= RFI grounding plug
= Straight plug
Each connector is furnished with contacts unless
= Less contacts (is not marked on the part)
= Connector kitted with M85049/31-XXX E-nut
= Connector kitted with M85049/52-1-XXX straight clamp
= Connector kitted with M85049/51-1-XXX right angle clamp
or
Z
= Alternate insert polarizations (see pages 82 thru 83 for position availability)
or
24
Military and Aero-Electric Part Number Development
MS34
AE7
70
70
–
71
L
L
–
Note 2:
single digit shell size ( 8) and no “0” after the dash between
shell size and single digit layout. Example of each:
MS3470W8-33P and MS3470W10-6P. In both “N” for normal
was omitted.
Note 3:
to Aero-Electric part number. Non standard contacts are
required and to avoid confusion are sold “with contacts”
only. See page 80 for the correct contact part numbers.
12 -
12 -
Proper part number marking has no “0” in front of
Insert layouts 8-2, 8-3 and 8-4 can only be ordered
Part Number Development
10
10
MIL-DTL-26482
P
P
sales
Series 2
W
W
@
aero-electric.com
-340