8-1393792-8 TE Connectivity, 8-1393792-8 Datasheet - Page 136

• Manufacturer Part Number: 8-1393792-8
• Description: Electromechanical Relay DPDT 3A 12VDC 968Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-8

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.4 mA
• Mounting: Through Hole

426
Operate Data @ 20 C
Operate/Release Time: 20 ms, max. (excluding bounce).
Bounce Time: 15 ms, max.
Operate Coil Power: 200mW.
Features
• Small size for high density PC board mounting.
• 1 Form A and 1 Form C contact arrangements.
• Creepage/clearance to VDE 0435 and VDE 0700.
• 2,500Vrms dielectric strength between contact and coil.
• UL Class F approved insulation system.
• Low-complexity design for enhanced reliability.
• High-temperature version available.
Contact Data
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver nickel 90/10.
Max. Switching Rate: 6,000 ops./min. (minimum load).
Expected Mechanical Life: 5 million operations.
Expected Electrical Life :
Maximum Contact Rating: PB1 &PB3: NO (Make) 10A / NC (Break) 3A.
Maximum Switching Voltage: PB1 &PB3: 250VAC, 100 VDC.
Maximum Make Current (All): 15A (max. 4 sec at 10% duty cycle.)
Maximum Breaking Capacity:
Initial Insulation Resistance
Between Mutually Insulated Elements: 10
Tracking Resistance of Relay Base: PB1: CTI 250
Insulation to VDE 0110b (2/79): Category C / Reference Voltage 250.
Coil Data @ 20 C
Voltage: 5, 6, 9, 12, 24 and 36VDC.
Nominal Coil Power:
Operate Coil Power:
Coil Data @ 20 C
Initial Dielectric Strength
Between Open Contacts: 1,000Vrms.
Between Coil and Contacts: 2,500Vrms.
Surge Voltage Resistance Between Coil and Contacts: 4,000Vrms.
Clearance / Creeepage Distance: 3 mm / 4 mm.
Dimensions are shown for
reference purposes only.
PB1 &PB3 @85 C: 100,000 operations @ 6A, 240VAC (NO).
PBH @105 C:
PB1 &PB3: 750VA (NC contact) / 2,500VA (NO contact).
PBH: 1,500VA.
Voltage
Rated
(VDC)
Coil
12
24
36
5
6
9
Resistance
(ohms)
1,600
3,600
Coil
100
225
400
10%
25,000 operations @ 10A, 240VAC (NO).
25,000 operations @ 10A/3A, 240VAC (NO/NC).
1,000 operations @ 10A/10A, 240VAC (NO/NC).
250,000 operations @ 2A, 240VAC (NO).
150,000 operations @ 5A, 240VAC (NO).
100,000 operations @ 6A/6A, 240VAC (NO/NC).
70
600 ops./min. (rated load).
360mW.
200mW.
PBH: 6A (mtg. space 3mm); 4A (dense pack).
PBH: 250VAC
Operate
Voltage
(VDC)
Must
18.0
27.0
3.75
4.5
6.75
9.0
PB3: CTI 300
Dimensions are in inches over
(millimeters) unless otherwise
specified.
8
ohms.
Release
Voltage
(VDC)
Must
0.5
0.6
0.9
1.2
2.4
3.6
Current
(mA)
Coil
72.0
60.0
40.0
30.0
15.0
60.0
Catalog 1308242
Issued 3-03
PB
10 Amp, PC Board
Miniature Relay
Contact Life (PB1 & PB3)
Max. DC Load Breaking Capacity (PB1 & PB3)
Coil Operating Range (PB1 & PB3)
Environmental Data
Temperature Range (Operating): PB1 or PB3: -40 C to +85 C.
Vibration: 30 to 400 Hz., 4g's, min.
Shock: Mechanical (Destruction): 30g min.
Protection Category: IP 54
Mechanical Data
Termination: Printed circuit board.
Enclosure: Splash-resistant (unsealed) plastic case (UL Flammability
Class V-0).
Weight: 0.2 oz. (5.4g).
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files
of the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
File E214025
File 4570-4940-0042
Specifications and availability
subject to change.
series
PBH: -20 C to +105 C.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
SCHRACK