PIC18F13K50T-I/SO Microchip Technology, PIC18F13K50T-I/SO Datasheet - Page 158

• Manufacturer Part Number: PIC18F13K50T-I/SO
• Description: 8 KB Flash, 512 RAM, 15 I/O, 10-bit ADC, USB 2.0 20 SOIC .300in T/R
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F13K50T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART, I2C, MSSP, SPI, USB
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM164127, DV164126
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164126 - KIT DEVELOPMENT USB W/PICKIT 2DM164127 - KIT DEVELOPMENT USB 18F14/13K50AC164112 - VOLTAGE LIMITER MPLAB ICD2 VPPXLT20SO1-1 - SOCKET TRANS ICE 20DIP TO 20SOIC
• Lead Free Status / Rohs Status: Details

PIC18F/LF1XK50
15.3.3.4
An SSP Mask (SSPMSK) register is available in I
Slave mode as a mask for the value held in the
SSPSR register during an address comparison
operation. A zero (‘0’) bit in the SSPMSK register has
the effect of making the corresponding bit in the
SSPSR register a “don’t care”.
This register is reset to all ‘1’s upon any Reset
condition and, therefore, has no effect on standard
SSP operation until written with a mask value.
REGISTER 15-6:
DS41350E-page 158
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-1
bit 0
Note 1: The MSK0 bit is used only in 10-bit slave mode. In all other modes, this bit has no effect.
R/W-1
MSK7
SSP Mask Register
MSK<7:1>: Mask bits
1 = The received address bit n is compared to SSPADD<n> to detect I
0 = The received address bit n is not used to detect I
MSK<0>: Mask bit for I
I
1 = The received address bit 0 is compared to SSPADD<0> to detect I
0 = The received address bit 0 is not used to detect I
2
C Slave mode, 10-bit Address (SSPM<3:0> = 0111):
R/W-1
MSK6
SSPMSK: SSP MASK REGISTER
W = Writable bit
‘1’ = Bit is set
R/W-1
MSK5
2
C Slave mode, 10-bit Address
R/W-1
MSK4
Preliminary
2
C
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-1
MSK3
This register must be initiated prior to setting
SSPM<3:0> bits to select the I
10-bit address).
The SSP Mask register is active during:
• 7-bit Address mode: address compare of A<7:1>.
• 10-bit Address mode: address compare of A<7:0>
only. The SSP mask has no effect during the
reception of the first (high) byte of the address.
2
2
C address match
(1)
C address match
R/W-1
MSK2
 2010 Microchip Technology Inc.
2
2
C address match
C address match
x = Bit is unknown
R/W-1
MSK1
2
C Slave mode (7-bit or
MSK0
R/W-1
(1)
bit 0