PIC18LF13K22-E/P Microchip Technology, PIC18LF13K22-E/P Datasheet - Page 90

• Manufacturer Part Number: PIC18LF13K22-E/P
• Description: 8KB Flash, 256bytes RAM, 256bytes EEPROM, 16MIPS, NanoWatt XLP 20 PDIP .300in TU
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF13K22-E/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F1XK22/LF1XK22
8.3
PORTC is an 8-bit wide, bidirectional port. The corre-
sponding data direction register is TRISC. Setting a
TRISC bit (= 1) will make the corresponding PORTC
pin an input (i.e., disable the output driver). Clearing a
TRISC bit (= 0) will make the corresponding PORTC
pin an output (i.e., enable the output driver and put the
contents of the output latch on the selected pin).
The PORTC Data Latch register (LATC) is also
memory mapped. Read-modify-write operations on the
LATC register read and write the latched output value
for PORTC.
REGISTER 8-11:
REGISTER 8-12:
DS41365D-page 90
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
TRISC7
R/W-1
R/W-x
RC7
PORTC, TRISC and LATC
Registers
RC<7:0>: PORTC I/O Pin bits
1 = Port pin is > V
0 = Port pin is < V
TRISC<7:0>: PORTC Tri-State Control bits
1 = PORTC pin configured as an input (tri-stated)
0 = PORTC pin configured as an output
TRISC6
R/W-x
R/W-1
RC6
PORTC: PORTC REGISTER
TRISC: PORTC TRI-STATE REGISTER
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
TRISC5
R/W-x
IH
IL
R/W-1
RC5
TRISC4
R/W-1
R/W-x
RC4
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
TRISC3
R/W-x
R/W-1
All the pins on PORTC are implemented with Schmitt
Trigger input buffer. Each pin is individually configu-
rable as an input or output.
EXAMPLE 8-3:
RC3
CLRF
CLRF
MOVLW
MOVWF
Note:
PORTC
LATC
0CFh
TRISC
On a Power-on Reset, RC<7:6> and
RC<3:0> are configured as analog inputs
and read as ‘0’.
TRISC2
R/W-1
R/W-x
RC2
; Initialize PORTC by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Value used to
; initialize data
; direction
; Set RC<3:0> as inputs
; RC<5:4> as outputs
; RC<7:6> as inputs
INITIALIZING PORTC
 2010 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
TRISC1
R/W-x
R/W-1
RC1
TRISC0
R/W-1
R/W-x
RC0
bit 0
bit 0