PIC24F16KA302T-I/SS Microchip Technology, PIC24F16KA302T-I/SS Datasheet - Page 201

• Manufacturer Part Number: PIC24F16KA302T-I/SS
• Description: 16KB Flash, 2KB RAM, 512B EEPROM, 16 MIPS, 12-bit ADC, CTMU, XLP 28 SSOP .209in
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA302T-I/SS

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 16KB (5.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP (0.209", 5.30mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FIGURE 19-2:
19.5
The RTCC includes a power control feature that allows
the device to periodically wake-up an external device,
wait for the device to be stable before sampling wake-up
events from that device and then shut down the external
device. This can be done completely autonomously by
the RTCC, without the need to wake from the current
low-power mode (Sleep, Deep Sleep, etc.).
To enable this feature, the RTCC must be enabled
(RTCEN = 1), the PWCEN register bit must be set and
the RTCC pin must be driving the PWC control signal
(RTCOE = 1 and RTCSECSEL<1:0> = 11).
 2011 Microchip Technology Inc.
POWER CONTROL
Note 1:
0000 - Every half second
0001 - Every second
0010 - Every 10 seconds
0011 - Every minute
0100 - Every 10 minutes
0101 - Every hour
0110 - Every day
0111 - Every week
1000 - Every month
1001 - Every year
Alarm Mask Setting
(AMASK<3:0>)
Annually, except when configured for February 29.
ALARM MASK SETTINGS
(1)
Day of
Week
the
d
PIC24FV32KA304 FAMILY
Month
m
m
The polarity of the PWC control signal may be chosen
using the PWCP register bit. Active-low or active-high
may be used with the appropriate external switch to
turn on or off the power to one or more external
devices. The active-low setting may also be used in
conjunction with an open-drain setting on the RTCC
pin. This setting is able to drive the GND pin(s) of the
external device directly (with the appropriate external
V
switches. Finally, the CHIME bit should be set to enable
the PWC periodicity.
DD
d
d
Day
pull-up device), without the need for external
d
d
Hours
h
h
h
h
h
h
h
h
Minutes
m
m
m
m
m
m
m
m
m
m
m
DS39995B-page 201
Seconds
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s