PIC24FV16KA304-E/ML Microchip Technology, PIC24FV16KA304-E/ML Datasheet - Page 144

• Manufacturer Part Number: PIC24FV16KA304-E/ML
• Description: 16KB Flash, 2KB RAM, 512B EEPROM, 16 MIPS, 12-bit ADC, CTMU, 5V 44 QFN 8x8x0.9mm
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FV16KA304-E/ML

• Processor Series: PIC24FV
• Core: PIC
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: QFN-44
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 38
• Eeprom Size: 512 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC24FV32KA304 FAMILY
REGISTER 12-1:
DS39995B-page 144
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-10
bit 9-8
bit 7
bit 6
bit 5-4
bit 3
bit 2
bit 1
bit 0
Note 1:
R/W-0
TON
U-0
—
The T1ECS bits are valid only when TCS = 1.
TON: Timer1 On bit
1 = Starts 16-bit Timer1
0 = Stops 16-bit Timer1
Unimplemented: Read as ‘0’
TSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
Unimplemented: Read as ‘0’
T1ECS <1:0>: Timer1 Extended Clock Select bits
11 = Reserved; do not use
10 = Timer1 uses LPRC as the clock source
01 = Timer1 uses External Clock from T1CK
00 = Timer1 uses Secondary Oscillator (SOSC) as the clock source
Unimplemented: Read as ‘0’
TGATE: Timer1 Gated Time Accumulation Enable bit
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation is enabled
0 = Gated time accumulation is disabled
TCKPS<1:0>: Timer1 Input Clock Prescale Select bits
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
Unimplemented: Read as ‘0’
TSYNC: Timer1 External Clock Input Synchronization Select bit
When TCS = 1:
1 = Synchronize external clock input
0 = Do not synchronize external clock input
When TCS = 0:
This bit is ignored.
TCS: Timer1 Clock Source Select bit
1 = Timer1 clock source selected by T1ECS<1:0>
0 = Internal clock (F
Unimplemented: Read as ‘0’
TGATE
R/W-0
U-0
—
T1CON: TIMER1 CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
TCKPS1
R/W-0
TSIDL
R/W-0
OSC
/2)
TCKPS0
R/W-0
U-0
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
(1)
TSYNC
R/W-0
U-0
—
 2011 Microchip Technology Inc.
x = Bit is unknown
T1ECS1
R/W-0
R/W-0
TCS
(1)
T1ECS0
R/W-0
U-0
—
bit 8
bit 0
(1)