PIC24FV16KA304T-I/MV Microchip Technology, PIC24FV16KA304T-I/MV Datasheet - Page 3

• Manufacturer Part Number: PIC24FV16KA304T-I/MV
• Description: 16KB Flash, 2KB RAM, 512B EEPROM, 16 MIPS, 12-bit ADC, CTMU, 5V 48 UQFN 6x6x0.5m
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FV16KA304T-I/MV

• Processor Series: PIC24FV
• Core: PIC
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: UQFN-48
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 38
• Eeprom Size: 512 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Lead Free Status / Rohs Status: Details

Power Management Modes:
• Run – CPU, Flash, SRAM and Peripherals On
• Doze – CPU Clock Runs Slower than Peripherals
• Idle – CPU Off, Flash, SRAM and Peripherals On
• Sleep – CPU, Flash and Peripherals Off and SRAM on
• Deep Sleep – CPU, Flash, SRAM and Most Peripherals
• Low-Power Consumption:
High-Performance CPU:
• Modified Harvard Architecture
• Up to 16 MIPS Operation @ 32 MHz
• 8 MHz Internal Oscillator with 4x PLL Option and
• 17-Bit by 17-Bit Single-Cycle Hardware Multiplier
• 32-Bit by 16-Bit Hardware Divider 16-Bit x 16-Bit
• C Compiler Optimized Instruction Set Architecture
Peripheral Features:
• Hardware Real-Time Clock and Calendar (RTCC):
• Programmable 32-bit Cyclic Redundancy Check
• Multiple Serial Communication modules:
• Five 16-Bit Timers/Counters with Programmable
• Three 16-Bit Capture Inputs with Dedicated Timers
• Three 16-Bit Compare/PWM Output with Dedicated
• Configurable Open-Drain Outputs on Digital I/O Pins
• Up to Three External Interrupt Sources
 2011 Microchip Technology Inc.
Off; Multiple Autonomous Wake-up Sources
- Run mode currents down to 8 μA, typical
- Idle mode currents down to 2.2 μA, typical
- Deep Sleep mode currents down to 20 nA, typical
- Real-Time Clock/Calendar currents down to
- Watchdog Timer 500 nA, 1.8V typical
Multiple Divide Options
Working Register Array
- Provides clock, calendar and alarm functions
- Can run in Deep Sleep mode
- Can use 50/60 Hz power line input as clock source
(CRC)
- Two 3-/4-wire SPI modules
- Two I
- Two UART modules supporting RS-485, RS-232,
Prescaler:
- Can be paired as 32-bit timers/counters
Timers
700 nA, 32 kHz, 1.8V
LIN/J2602, IrDA
2
C™ modules with multi-master/slave support
20/28/44/48-Pin, General Purpose, 16-Bit Flash
®
Microcontrollers with XLP Technology
PIC24FV32KA304 FAMILY
Analog Features:
• 12-Bit, up to 16-Channel Analog-to-Digital Converter:
• Dual Rail-to-Rail Analog Comparators with
• On-Chip Voltage Reference
• Internal Temperature Sensor
• Charge Time Measurement Unit (CTMU):
Special Microcontroller Features:
• Wide Operating Voltage Range:
• Low Power Wake-up Sources and Supervisors:
• System Frequency Range Declaration bits:
• Standard Watchdog Timer (WDT) with On-Chip,
• Programmable High/Low-Voltage Detect (HLVD)
• Standard Brown-out Reset (BOR) with 3 Programmable
• High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
• Flash Program Memory:
• Data EEPROM:
• Fail-Safe Clock Monitor
• Programmable Reference Clock Output
• Self-Programmable under Software Control
• In-Circuit Serial Programming™ (ICSP™) and
- 100 ksps conversion rate
- Conversion available during Sleep and Idle
- Auto-sampling timer-based option for Sleep and
- Wake on auto-compare option
Programmable Input/Output Configuration
- Used for capacitance sensing, 16 channels
- Time measurement, down to 200 ps resolution
- Delay/pulse generation, down to 1 ns resolution
- 1.8V to 3.6V (PIC24F devices)
- 2.0V to 5.5V (PIC24FV devices)
- Ultra-Low Power Wake-up (ULPWU) for
- Low-Power Watchdog Timer (DSWDT) for
- Extreme Low-Power Brown-out Reset (DSBOR)
- Declaring the frequency range optimizes the
Low-Power RC Oscillator for Reliable Operation
Trip Points that can be Disabled in Sleep
- Erase/write cycles: 10,000 minimum
- 40 years’ data retention minimum
- Erase/write cycles: 100,000 minimum
- 40 years’ data retention minimum
In-Circuit Debug (ICD) via 2 Pins
Idle modes
Sleep/Deep Sleep
Deep Sleep
for Deep Sleep, LPBOR for all other modes
current consumption.
DS39995B-page 3