HSDL-3612-008 Lite-On Electronics, HSDL-3612-008 Datasheet - Page 18

• Manufacturer Part Number: HSDL-3612-008
• Description: Infrared Transceivers IR Transceiver 115.2Kb/s
• Manufacturer: Lite-On Electronics
• Type: TX/RXr

Specifications of HSDL-3612-008

• Pulse Width: 1.6/4us
• Led Supply Voltage: -0.5 to 7V
• Dimensions: 12.2x5.1x4
• Peak Wavelength: 875/880nm
• Angle Of Half Sensitivity: 60/30°
• Communication Distance: 150
• Package Type: Ultra Small Profile
• Fall Time: 40/25ns
• Rise Time: 40/25ns
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.25V
• Mounting: Surface Mount
• Pin Count: 11
• Operating Temp Range: -20C to 70C
• Operating Temperature Classification: Commercial
• Data Rate: 115.2Kbps
• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 115.2 Kbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 120 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 5.25 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant

18
3.2 Tolerance for Rotational (Theta) Misalignment
Units when mounted should not be rotated more than
± 2 degrees with reference to center X-Y as specified in
Fig 2.0. Pictures 3.0 and 4.0 show units before and after
reflow. Units with a Theta misalignment of more than 2
degrees do not completely self align after reflow. Units
with ± 2 degree rotational or Theta misalignment self-
aligned completely after solder reflow.
Photo 3.0. Unit is rotated before reflow.
Photo 1.0. Castellation misaligned to land pads in x-axis before
3.1 Tolerance for X-axis Alignment of Castellation
Misalignment of castellation to the land pad should not
exceed 0.2 mm or approximately half the width of the
castellation during placement of the unit. The castel-
lations will completely self-align to the pads during
solder reflow as seen in the pictures below.
reflow.
Photo 2.0. Castellation self-align to land pads after reflow.
Photo 4.0. Unit self-aligns after reflow.