TORX141P Toshiba, TORX141P Datasheet - Page 4

• Manufacturer Part Number: TORX141P
• Manufacturer: Toshiba

Specifications of TORX141P

• Optical Fiber Type: RX
• Data Transfer Rate: 15Mbps
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (typ): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -20C to 70C
• Mounting: Snap in
• Pin Count: 5
• Lead Free Status / RoHS Status: Not Compliant

(5)
(6)
(7)
(8)
(9)
(10) Output
(11) Soldering condition
(12) Precautions when disposing of devices and packing materials.
(13) Precautions during use
Support pins
The TORX141P has support pins in order to fix itself to the PCB temporary. Please make the hole for these
pins in the PCB under the condition described in board layout hole pattern.
Attaching the fiber optic receiving module
Solder the fixed pins (pins 4 and 5) of the fiber optic receiving module TORX141P to the printed circuit
board in order to fix it to the board.
Solvent
When using solvent for flux removal, do not use a high acid or high alkali solvent. Be careful not to pour
solvent in to the optical connector ports. If solvent is inadvertently poured in to them, clean it off using
cotton tips.
Protective cap
When the TORX141P is not in use, attach the protective cap.
Supply voltage
Use the supply voltage within the recommended operating condition (V
supply voltage does not exceed the maximum rating value of 4.5 V, even for an instant.
If the receiver output is at low and is connected to the power supply, or if the output is high and is
connected to GND, the internal IC may be destroyed.
Solder at 260°C or less for no more than ten seconds.
When disposing devices and packing materials, follow the procedures stipulated by local regulations in
order to protect the environment against contamination.
Toshiba is continually working to improve the quality and the reliability of their products. Nevertheless,
semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and
their vulnerability to physical stress. It is the responsibility of the buyer, when utilizing Toshiba products,
to observe standards of safety, and to avoid situations in which the malfunction or failure of a Toshiba
product could cause loss of human life, bodily injury or damage to property.
When developing equipment, please ensure that Toshiba products are used within the specified operating
ranges set forth in the most recent product specifications. Also, please keep in mind the precautions and
conditions set forth in the Toshiba Semiconductor Reliability Handbook.
4
CC
= 2.7 to 3.3 V). Make sure that
TORX141P
2001-10-03