APC12J03-9MAL Emerson Network Power, APC12J03-9MAL Datasheet - Page 12

• Manufacturer Part Number: APC12J03-9MAL
• Manufacturer: Emerson Network Power
• Type: Step Downr

Specifications of APC12J03-9MAL

• Number Of Outputs: 1
• Output Current: 12A
• Input Voltage: 3.3V
• Output Voltage: 0.9V
• Screening Level: Industrial
• Product Length (mm): 33.02mm
• Product Depth (mm): 16mm
• Mounting Style: Surface Mount
• Pin Count: 7
• Package / Case: SMT
• Lead Free Status / Rohs Status: Compliant

Power Good Signal Operation (Option (-9MA)):
PG pin provides an output signal indicating the Vout is
operational (TTL logic signal). It can sink current up to a max
of 5mA and can have a maximum external pull-up voltage of
6V. Please see recommended setup shown on Figure 6.
Active Current Share Operation (Option (-9MA)):
Active Current share pin is compatible with like modules only (APC08 to APC08 or APC12 to APC12). Connecting this pin
directly with the same Pin from another module guarantees current sharing to within 40% to 60% Iout. Note that this pin is not
compatible with competitive modules that employ active current sharing.
To attain efficient current sharing between like modules, the following points are recommended:
a) The modules to be shared should be located as close as possible into the host card.
b) The copper tracks that connect Vo and GND should at least be 0.60" in width with at least 2 oz. Cu.
MODEL: APC12 SERIES
JANUARY 6, 2002 REVISION A (PRELIMINARY)
Technical Reference Notes
APC12 Centauri II
Figure 6. PGood setup.
SHEET 12 OF 23