AN2135SC Cypress Semiconductor Corp, AN2135SC Datasheet - Page 84

• Manufacturer Part Number: AN2135SC
• Description: IC MCU 8051 8K RAM 24MHZ 44QFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-USB®r

Specifications of AN2135SC

• Applications: USB Microcontroller
• Core Processor: 8051
• Program Memory Type: ROMless
• Controller Series: AN213x
• Ram Size: 8K x 8
• Interface: I²C, USB
• Number Of I /o: 8
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 44-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 428-1308

If, at power-on, the EZ-USB core detects an EEPROM connected to its I
value 0xB0 at address 0, the EZ-USB core copies the Vendor ID (VID), Product ID (PID),
and Device ID (DID) from the EEPROM (Table 5-7) into internal storage. The EZ-USB
core then supplies these bytes to the host as part of the Get_Descriptor-Device request.
(These six bytes replace only the VID/PID/DID bytes in the default USB device descrip-
tor.) This causes a driver matched to the VID/PID/DID values in the EEPROM, instead of
those in the EZ-USB core, to be loaded into the OS.
After initial enumeration, the driver downloads 8051 code and USB descriptor data into
EZ-USB RAM and starts the 8051. The code then ReNumerates
custom device.
A recommended EEPROM for this application is the Microchip 24LC00, a small (5-pin
SOT package) inexpensive 16-byte serial EEPROM. A 24LC01 (128 bytes) or 24LC02
(256 bytes) may be substituted for the 24LC00, but as with the 24LC00, only the first
seven bytes are used.
EZ-USB TRM v1.9
Reminder
The EZ-USB core uses the Table 5-6 data for enumeration only if the ReNum bit is zero.
If ReNum=1, enumeration data is supplied by 8051 code.
5.7
Serial EEPROM Present, First Byte is 0xB0
Table 5-7. EEPROM Data Format for “B0” Load
EEPROM
Address
0
1
2
3
4
5
6
7
Chapter 5. EZ-USB CPU
0xB0
Vendor ID (VID) L
Vendor ID (VID) H
Product ID (PID) L
Product ID (PID) H
Device ID (DID) L
Device ID (DID) H
Not used
Contents
to come on as the fully
2
C port with the
Page 5-9