MMA7456LT Freescale Semiconductor, MMA7456LT Datasheet - Page 17

• Manufacturer Part Number: MMA7456LT
• Description: Board Mount Accelerometers 3-AXIS DIGTL 12C&SP1
• Manufacturer: Freescale Semiconductor
• Series: -r

Specifications of MMA7456LT

• Sensing Axis: X, Y, Z
• Acceleration: 2 g, 4 g, 8 g
• Sensitivity: 64 count/g, 32 count/g, 16 count/g
• Package / Case: LGA-14
• Output Type: Digital
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.4 V
• Supply Current: 400 uA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Axis: X, Y, Z
• Acceleration Range: ± 2g, 4g, 8g
• Voltage - Supply: 2.4 V ~ 3.6 V
• Bandwidth: 6kHz - XY, 3.4kHz - Z
• Interface: I²C, SPI
• Mounting Type: Surface Mount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

SINGLE BYTE WRITE
To start a write command, the Master transmits a start condition (ST) to the MMA7456L, slave address ($1D) with the R/W bit set
to “0” for a write, the MMA7456L sends an acknowledgement. Then the Master (MCU) transmits the 8-bit address of the register
to write to, and the MMA7456L sends an acknowledgement. Then the Master (or MCU) transmits the 8-bit data to write to the
designated register and the MMA7456L sends an acknowledgement that it has received the data. Since this transmission is com-
plete, the Master transmits a stop condition (SP) to the data transfer. The data sent to the MMA7456L is now stored in the ap-
propriate register. See
MULTIPLE BYTES WRITE
The MMA7456L automatically increments the received register address commands after a write command is received. Therefore,
after following the steps of a single byte write, multiple bytes of data can be written to sequential registers after each MMA7456L
acknowledgment (ACK) is received. See
Sensors
Freescale Semiconductor
Figure 10. Multiple Byte Writes - The Master (MCU) is writing to multiple sequential registers of the MMA7456L
Figure 8. Multiple Bytes Read - The Master is reading multiple sequential registers from the MMA7456L
Figure 9. Single Byte Write - The Master (MCU) is writing to a single register of the MMA7456L
Figure 7. Single Byte Read - The Master is reading one address from the MMA7456L
Figure
9.
Figure
10.
MMA7456L
17