LAN9211-ABZJ SMSC, LAN9211-ABZJ Datasheet - Page 140

• Manufacturer Part Number: LAN9211-ABZJ
• Description: IC ETHERNET CTLR SGL CHIP 56-QFN
• Manufacturer: SMSC
• Type: Single Chip MAC and PHY Controllerr

Specifications of LAN9211-ABZJ

• Controller Type: Ethernet Controller
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 56-QFN
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: IEEE 802.3 or IEEE 802.3u
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 5 V
• Supply Voltage (min): 3.3 V
• Supply Current (max): 86 mA
• Maximum Operating Temperature: + 70 C
• Ethernet Connection Type: 100BASE-TX or 10BASE-T
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• No. Of Ports: 2
• Ethernet Type: IEEE 802.3 / 802.3u
• Interface Type: HBI
• Supply Current: 86mA
• Supply Voltage Range: 2.97V To 3.63V
• Operating Temperature Range: 0°C To +70°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 638-1049-6

Revision 2.7 (03-15-10)
7.5
+3.3V I/O Supply Current
+3.3V Analog Supply Current
This section details the worst case current consumption for each device power supply. These values
are provided to assist system designers with proper power supply design. These values cannot be
used to determine typical power consumption of the device.
Note: The current measurements listed below were taken under the following conditions:
Temperature: ........................................................................................................................0
Device VDD:.................................................................................................................. +3.30 V +/- 10%
Note: Current consumption is determined by operating frequency, temperature, and supply voltage,
Note: Above values do not include the supply current for the magnetics. Based on the recommended
Worst Case Current Consumption
PARAMETER
as well as external source/sink requirements.
implementation, the maximum supply current needed for the magnetics is 108mA.
Table 7.3 Maximum Supply Current Characteristics
SUPPLY NAME
DATASHEET
High-Performance Small Form Factor Single-Chip Ethernet Controller with HP Auto-MDIX Support
VDD_A33
VDD_IO
140
MAX
86
46
UNITS
mA
mA
SMSC LAN9211
o
C to +70
NOTES
Datasheet
o
C