ISP1160BM01TM ST-Ericsson Inc, ISP1160BM01TM Datasheet - Page 29

• Manufacturer Part Number: ISP1160BM01TM
• Description: IC USB HOST CTRL FULL-SPD 64LQFP
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1160BM01TM

• Controller Type: USB 2.0 Controller
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Current - Supply: 47mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 568-1879-2; ISP1160BM/01,118; ISP1160BM01-T

Philips Semiconductors
Table 6:
9397 750 13963
Product data
Observed items
Hc PInterrupt register
Bit 1 (ATLInt)
Bit 2 (AllEOTInterrupt)
HcBufferStatus register
Bit 2 (ATLBufferFull)
Bit 5 (ATLBufferDone)
USB traffic on USB Bus
Run results of the C program example
9.5 HC operational model
//write 80 (0x50) bytes of data into ATL buffer RAM
for (i 0;i<wCount;i
//Check EOT interrupt bit
//Check Buffer status register
//
// Read HC 16-bit registers
//
unsigned int HcRegRead(unsigned int wIndex)
}
//
// Write HC 16-bit registers
//
void HcRegWrite(unsigned int wIndex,unsigned int wValue)
Upon power up, the HCD sets up all operational registers (32-bit). The
FSLargestDataPacket field (bits 30 to 16) of the HcFmInterval register (0DH to read,
8DH to write) and the HcLSThreshold register (11H to read, 91H to write) determine
{
outport(HcDataPort,PTDData[i]);
};
wData
printf("\n HC Interrupt Status
wData
printf("\n HC Buffer Status
}
{ unsigned int wValue;
outport(HcCmdPort,wIndex & 0x7f);
wValue
return(wValue);
{
outport(HcCmdPort,wIndex | 0x80);
outport(HcDataPort,wValue);
}
HC not initialized and not in
USBOperational state
HcRegRead(wHcuPInterrupt);
HcRegRead(wHcBufferStatus);
inport(HcDataPort);
no
0
1
1
0
Rev. 05 — 24 December 2004
)
HC initialized and in
USBOperational state
xH.\n",wData);
yes
1
1
1
1
xH.\n",wData);
Embedded USB Host Controller
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Comments
microprocessor must read ATL
transfer completed
transfer completed
PTD data processed by HC
OUT packets can be seen
ISP1160
28 of 88