ES-UA-5A BANNER ENGINEERING, ES-UA-5A Datasheet - Page 16

• Manufacturer Part Number: ES-UA-5A
• Description: Sensor, E-stop Module, output 6A,
• Manufacturer: BANNER ENGINEERING
• Type: Safetyr

Specifications of ES-UA-5A

• Contact Form: 4-NO/1-NC
• Dimensions: 45mmW×84mmH×118mmD
• Enclosure Rating: IP20
• Ip Rating: IP20
• Mounting Type: DIN Rail
• Number Of Outputs: 8
• Output Type: Relay
• Power, Rating: 4 W
• Primary Type: Controller
• Standards: UL, CSA, CE
• Voltage, Supply: 115/12 to 24 VAC/VDC
• Coil Voltage Vdc Nom: 24V
• Coil Resistance: 250ohm
• Contact Current Max: 6A
• Contact Voltage Ac Nom: 24V
• Contact Voltage Dc Nom: 250V
• Contact Configuration: SPST-NC
• No. Of Poles: 1
• Relay Mounting: DIN Rail
• Lead Free Status / Rohs Status: RoHS Exempt Product
• For Use With: Emergency Stop

Figure 6: Dimensions — in mm (inches)
16
Condition
Module will not reset
No fault indicated
No fault indicated
No fault indicated
118.0 mm
(4.6")
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Indicator Status
Power LED ON
Fault LED OFF
Ch1 LED Flashing
Ch2 LED Flashing
Power LED ON
Fault LED OFF
Ch1 LED OFF
Ch2 LED OFF
Power LED ON
Fault LED OFF
Ch1 LED OFF
Ch2 LED ON
Power LED ON
Fault LED OFF
Troubleshooting
Tel: [phone]
84 mm
(3.3")
ES-UA-5A and ES-VA-5A E-Stop Safety Modules
Possible Causes / Solutions
Waiting for manual reset:
E-stop button open:
Ch.1 open; Ch. 2 closed:
Ch.1 closed; Ch. 2 open:
EDM monitoring contacts are not closed. Check MSCs.
Check jumper at S32-S35 (auto reset) or S32-S33
(manual reset).
Check reset button connection.
Connector loose.
Re-arm E-stop button.
Check wiring to S11-S12.
Check switch.
Check connectors are properly seated.
Check wiring to S21-S22.
45 mm
(1.8")
P/N 122365 rev. C