422A100F30X ATC Diversified Electronics, 422A100F30X Datasheet - Page 3

• Manufacturer Part Number: 422A100F30X
• Description: Relay; E-Mech; Timing; Repeat Cycle; DPDT; Cur-Rtg 10A; Ctrl-V 24-240/24AC/DC; 8 Pin
• Manufacturer: ATC Diversified Electronics

Specifications of 422A100F30X

• Brand/series: 422A Series
• Contact Form: DPDT
• Current, Rating: 10 A
• Function: Timing
• Mounting Type: Panel
• Number Of Pins: 8
• Power, Rating: 240 VA
• Relay Type: Electro Mechanical
• Standards: cULus, CSA, CE
• Timer Type: Repeat Cycle
• Timing Range: 1 or 10 sec.⁄min.⁄hrs.
• Voltage, Control: 240⁄24 VAC⁄VDC
• Voltage, Rating: 250⁄30 VAC⁄VDC

• Six Selectable Ranges:
• Individually adjustable ON-time and OFF-time
• Cycle can begin with relay energized or de-energized
• Both Repeat Cycle and Single Cycle operation available
• Cycle progress indication
• DPDT Relay Output
• Relay rated 10 A @ 30 VDC, 240 VAC
• Power: 24 VDC, 24 to 240 VAC
• Standard 1/8 DIN Housing
• Can be panel mounted
\\\
1 and 10 SEC/MIN/HRS
5 and 50 SEC/MIN/HRS
DIMENSIONS
(INCHES/MILLIMETERS)
is used to set the On-time and the other knob is used to set the Off-time for the timer’s cycle.
mounted in an 8-pin round (octal) socket. The front of the 422A features 2 knobs. One knob
The 422A’s 1/8 DIN housing is compact, and designed for panel mounting. The timer is
day during a plant operation.
ideal for lubrication or other maintenance functions that must occur each shift or
be energized for a brief time over a cycle that can last up to 50 hours. This is
ranges individually selectable for ON-time and OFF-time allows for a load to
either 1 and 10 SEC/MIN/HRS or 5 and 50 SEC/MIN/HRS. Having these
6 selectable ranges for the OFF-time period. These ranges can be ordered as
There are six selectable timing ranges available for the ON-time period and
The 4 4 2 2 2 2 A A F F L L I I P P - - F F L L O O P P is available with Repeat Cycle operation. During Repeat
Cycle operation the 422A cycles ON and OFF repeatedly, allowing periodic
de-energized during the first timing period.
cycling of a load. Two knobs are available to individually adjust the ON-
time and the OFF-time. The 422A can be ordered with either the relay
ordered with the relay being energized during the first timing period or
being energized during the first timing period or de-energized during the
is commonly referred to as “one-shot” operation. The 422A can be
first timing period.
The 422A FLIP-FLOP is also available with Single Cycle operation. With
Single Cycle operation, the 422A will cycle ON and OFF one time. This
The timing range for the On-time and Off-time can be individually
set. The range select switches are located on the side of the hous-
ing, so that when panel mounted, these switches are not accessi-
ble to the operator. This tamper proof feature prevents unautho-
rized or hazardous changes to the timing range from being made.
The output of the 422A is a DPDT mechanical relay which is rated
for 10 Amps at 30 VDC and 240 VAC. The 422A can be ordered
with this output being energized during the first timing period, or
de-energized during the first timing period.
A single Flip-Flop Timer can be powered using 24-240 VAC or 24
VDC power, greatly simplifying ordering and inventory manage-
ment of replacement units.
The 422A has individual LED indicators for ON-time and Off-time.
These LED’s provide a unique and effective method of cycle
progress indication. Off before timing, the LED’s blink at an ever
increasing rate as the cycle progresses: once every 3 1/2 seconds
during the first 10% of the cycle, twice during the second 10%,
and so on until the timing cycle is complete. (In the 1, 5, 10 and
50 second ranges, the LED is Off before timing and steady On
during the timing cycle).