D-M9N SMC Corporation, D-M9N Datasheet - Page 89

• Manufacturer Part Number: D-M9N
• Description: Sensor, solid state, direct mount, grommet connection, for MX/MH/CQ2/NCQ2/NCQ8
• Manufacturer: SMC Corporation
• Type: Hall Effectr

Specifications of D-M9N

• Function: Proximity
• Primary Type: Proximity
• Technology: Hall Effect

<Applicable auto switch>
Solid state switch······D-P5DWL
1. From the cutoff part of the rail on the cylinder body, insert the switch
2. Slide the switch mounting nuts (2 pcs.) and set into the auto switch
3. Insert the convex portion of the switch mounting bracket into the concave
4. Put a flat washer (ø8 x ø3.3) through a hexagon socket head screw (with
5. Put a round head Phillips screw (with spring washer, M3 x 0.5 x 14 l)
6. After reconfirming the detecting position, tighten the mounting screw to
Auto Switch Mounting Bracket Part No.
(Including bracket, screw)
6-16-68
How to Mount and Move the Auto Switch
How to Mount and Move the Auto Switch
Mounting Bracket
mounting nuts (2 pcs.) into the rail groove.
mounting position roughly. (25 mm or more should be left for the distance
between 2 nuts.)
portion of a rail groove. Through-hole for the switch mounting bracket
should be placed on the switch mounting nut.
spring washer, M3 x 0.5 x 5 l) and passing through the hole of a switch
mounting bracket, then turning it lightly down to a mounting nut of switch.
(2 locations)
through the auto switch's through-hole (2 locations), and then push it
down into the M3 tapped part on the switch mounting bracket while
turning it lightly.
secure the mounting bracket and the auto switch. (Tightening torque of
M3 screw should be 0.5 to 0.7 N·m.)
Switch mounting nut
Cylinder series
With spring washer, M3 x 0.5 x 5
Hexagon socket head cap screw
MDU
Flat washer
ø8 x ø3.3 x t0.8
BMU2-040
40
Rail Mounting Style
l
Applicable bore size (mm)
BMU2-040
50
Switch mounting bracket
Auto switch
Round head Phillips screw
With spring washer,
BMU2-040
M3 x 0.5 x 14
63
l