DS90CR288AMTD/NOPB National Semiconductor, DS90CR288AMTD/NOPB Datasheet - Page 15

• Manufacturer Part Number: DS90CR288AMTD/NOPB
• Description: IC RCVR 28BIT CHAN LINK 56TSSOP
• Manufacturer: National Semiconductor
• Type: Receiverr

Specifications of DS90CR288AMTD/NOPB

• Number Of Drivers/receivers: 0/4
• Protocol: RS644
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 56-TSSOP
• Supply Current: 135mA
• Supply Voltage Range: 3V To 3.6V
• Driver Case Style: TSSOP
• No. Of Pins: 56
• Operating Temperature Range: -10°C To +70°C
• Msl: MSL 2 - 1 Year
• Data Rate Max: 595Mbps
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *DS90CR288AMTD; *DS90CR288AMTD/NOPB; DS90CR288AMTD

Applications Information
Input Clock section. Do not power up and enable (PWR
DOWN = HIGH) the transmitter without a valid clock signal
applied to the TxCLK IN pin.
The CHANNEL LINK chipset is designed to protect itself
from accidental loss of power to either the transmitter or
FIGURE 19. Single-Ended and Differential Waveforms
(Continued)
15
receiver. If power to the transmit board is lost, the receiver
clocks (input and output) stop. The data outputs (RxOUT)
retain the states they were in when the clocks stopped.
When the receiver board loses power, the receiver inputs are
shorted to V
(5 mA per input) by the fixed current mode drivers, thus
avoiding the potential for latchup when powering the device.
CC
through an internal diode. Current is limited
10108726
www.national.com